Secure Transaction
loading ...
Lens Mount Adapter Manual Focus Compatible with Canon EOS Lens to Sony Alpha Nex E-Mount Camera Body,Compatible for Sony NEX-3, NEX-5, NEX-5N, a6000, a6500, NEX-C3, NEX-F3, Not Auto-Focus
Special
In Stock
- days
- :
- hours
- :
- min
- :
- sec
$22.99
$24.99
8% OFF
To United States Expedited Shipping 3-5 business days
AI-NEX
AI-NEX 1
C-NEX
C/G-NEX
C/Y-NEX
C/Y-NEX with Tripod Mount
EOS-NEX
EOS-NEX with Tripod Mount
EXA-NEX
FD-NEX
FD-NEX 1
HASSEL(V) - E
KONICA-NEX
L/R-NEX
LM-NEX
M39-NEX 1
M42-NEX
M42-NEX 1
MD-NEX
MD-NEX with Tripod Mount
MD-NEX1
Minolta(AF)-NEX
Nikon(G)-NEX
Nikon-NEX with Tripod Mount
OM-NEX 1
OM-NEX with Tripod Mount
PK-NEX 1
PK/DA-NEX
Praktica-NEX
QBM-NEX
SC - E
T2-NEX
Tamron-NEX
Description
- * 【MANUAL ADAPTER】This is Manual adapters without electronic contacts, which therefore don't support auto-focus or aperture control. You need to manually adjust focus and exposure settings.
- * 【Easy installation】Smooth surface for effortless mount,infinity focus allowed; Made of brass and aluminum (not plastic), anodized aluminum construction.Diaphragm control of the lens is set manually.
- * 【Compatible Cameras (Including, but not limited to)】Sony NEX-3 NEX-3C NEX-3N NEX-5 NEX-5C NEX-5N NEX-5R NEX5T NEX6 NEX7 NEX-F3 a6000 a5000 a3500 a3000 Alpha A7 A7R NEX-VG10 VG20 etc NOTE: This adapter will NOT fit on the Sony a7S, a7 II, a7S II, and a7R II.
- * 【Please note】Infinity focus position：the position of the infinity mark 【∞】of the telephoto lens or super telephoto lens is shifted slightly to the positive side to enable focus adjustment even when focus shift is caused due to temperature changes.The shift range is denoted by an L-shaped line, Be sure to check the focus through the viewfinder even when you shoot at infinity.
- * 【For Canon EF EF-S Lens】As Canon's EOS lenses are electronically controlled，most Canon EF mount lenses do not feature a manual aperture ring，so when used on our canon to sony adapter, which is a full manual operation adapter ring, the aperture could not be transfered to the camera, it will stop down to its smallest f/stop by default.
Unsure your lens mount ? check here
Unsure your camera mount ? check here
Video for verify your lens and camera mount check here
Related Products
$22.99
Shipping
To United States Expedited Shipping 3-5 business days
Accessories
Frequently Bought Together
Top Bestselling Products
HOT
Seller
HOT
Seller
Brand Story
Application
Manual adapter without electronic contacts, doesn't support autofocus/auto diaphragm/aperture control.
Adapting APS-frame lens to full-frame camera, it may generate vignetting, some cameras could correct it by adjust APSC.
Adapting full-frame lens to APS-frame camera provides excellent edge-to-edge sharpness. The smaller image field helps minimize the effects of lens distortion and aberration by using the 'sweet spot' or center of the larger lens image circle. And it will magnify the focal length by 1.6 on Canon, 1.5 on Nikon and Sony, 2.0 on M4/3 camera.
Set camera "release shutter without lens" to enable when using the adapter for the first time, or the camera will fail to recognize the lens and the shutter may not be released.
Adapting APS-frame lens to full-frame camera, it may generate vignetting, some cameras could correct it by adjust APSC.
Adapting full-frame lens to APS-frame camera provides excellent edge-to-edge sharpness. The smaller image field helps minimize the effects of lens distortion and aberration by using the 'sweet spot' or center of the larger lens image circle. And it will magnify the focal length by 1.6 on Canon, 1.5 on Nikon and Sony, 2.0 on M4/3 camera.
Set camera "release shutter without lens" to enable when using the adapter for the first time, or the camera will fail to recognize the lens and the shutter may not be released.
Why Should You Choose K&F Concept?
Professional camera accessory manufacturer.
Reliable partner in your photography life.
Premium picked up products.
Adapters are made of metal sealing ring, much tighter, with laser fonts, much durable.
Freely contact our professional after sales team for help or technical support in needed.
Reliable partner in your photography life.
Premium picked up products.
Adapters are made of metal sealing ring, much tighter, with laser fonts, much durable.
Freely contact our professional after sales team for help or technical support in needed.
Suitable for:
Lens: Canon EF Mount Lens
Camera: Sony Alpha E-mount Cameras (NOT for Sony A mount cameras)
Properly installed when you rotate about 90 degrees and hear a light "click".
Please screw the lens adapter lightly and skillfully, needn't too much force.
Camera: Sony Alpha E-mount Cameras (NOT for Sony A mount cameras)
Properly installed when you rotate about 90 degrees and hear a light "click".
Please screw the lens adapter lightly and skillfully, needn't too much force.
Infinity focus position:
The position of the infinity mark [∞] of the telephoto lens or super telephoto lens is shifted slightly to the positive side to enable focus adjustment even when focus shift is caused due to temperature changes. The shift range is denoted by an L-shaped line, Be sure to check the focus through the viewfinder even when you shoot at infinity.
Note: 'No Lens Attached' - Warning Message Appears
The camera needs to be set to function without an E-Mount lens attached. You can do this by changing the following camera setting: 'Menu' -> 'Setup' -> 'Release w/o Lens' -> 'Enable' (Exact naming and location of this option may change depending on camera model). If your lens does not have a manual aperture control ring, it will stop down to its smallest f/stop by default.
Reviews (161)
- All Reviews
- Image
Verified Purchase
Great for Vintage Lens'
I used this to adapt some vintage yashica lens' to my sony a6000. It worked great! I attatched a picture I took with the lens of my cat.
18/11/2024
Verified Purchase
Perfect Fit for Sony A series camera!
I am using the adapter to use my Super-Takumar 50mm1.4 and the package includes a tool to remove the washer inside to enable it to use the aperture ring properly. The description says it's incompatible with Sony a7r2 but it does fit perfectly with no wiggle play. I've already ordered 3 and it all works perfectly.
Highly recommended
Highly recommended
16/11/2024
Verified Purchase
Adapter fits perfectly on my Sony a6000
Adapter fits perfectly on my Sony a6000. Looks and feels very well made. For a low investMent it allows you to use your legacy Minolta Rokkor lens. You can expand your lens collection inexplicably with those legacy SLR lens. I currently have a Minolta Rokkor MC 50mm and a Vivitar 85-205mm zoom; both fit perfectly to the adapter and the adapter to camera base. You just have go back to your roots and manually adjust all settings. Focusing was easy. I did notice a lag in the viewfinder when adjusting the f stop using the Vivitar zoom, but not difficult to get true view before shooting pics. Rokkor 50mm works great.
Just took a couple early morning pics with my Minolta 50mm. 1/320, ISO 3200, and f 1.7 (manual settings) Pic as shot and I didn’t do any editing/corrections. Enjoy!
Just took a couple early morning pics with my Minolta 50mm. 1/320, ISO 3200, and f 1.7 (manual settings) Pic as shot and I didn’t do any editing/corrections. Enjoy!
12/11/2024
Verified Purchase
Very good investment
Good quality, quite compact
09/11/2024
Verified Purchase
C/Y to NEX Adapter
By no means am I a pro photographer so take this with a grain of salt. I’ve been using it to adapt Yashica ML lens onto the Sony A6000. my initial thoughts after using it for the first 2 weeks are overall good but do have some criticisms. The adapter it self is solid, holding it you can tell it’s an all aluminum construction. Installing the adapter onto the camera was easy and adding the lens was a breeze. Its a basic adapter so no auto focus, no image stabilization, and no additional adjustment rings. This is not my criticism but adding that in for good measure. My criticism lies in that there is a bit of a gap between the adapter and the camera body. It’s a small gap, and I mean small, between the camera body and adapter. It’s not too big of a deal and haven’t noticed light leaks but it does cause a slight wiggle. For reference the gap between the lens and adapter is about the thickness of a sheet of printer paper. Image quality will depend on the lens itself but it does take some time to learn to use a manual focus lens. The test photo was taken to see accuracy. Toy was set 4ft away and shot at f3.5 using 75mm lens at 4ft focus marker on lens. Overall I would buy this adapter again I think it’s a great deal if u want to give new life to an old lens.
04/11/2024
Verified Purchase
100% Solid
The product arrived very quickly. It feels heavy and of good quality. I have not been able to attach it to my Sony Alpha7ii yet, but it works well with the four legacy Minolta MD or MC lenses I have. Here's an image of a MD TELE ROKKOR-X 200mm 1:4 lens with the adapter in place. It fits VERY snuggly, and locks in place with a solid click. NO looseness whatsoever. The silver push pin on the adepter is a bit loose but does its job. Just line the adapter's red dot up with the red dot on the lens body and turn clockwise until it stops, (it will still feel a little loose at that point), then push a little harder for another eighth of a turn until you hear the adapter "click" and lock to the lens. The red dots on the adapter and on the lens body will be about an inch and a quarter from each other once the adapter is fully locked to the lens. If the adapter fits as snugly to the camera body as it does to the lens, it is going to be a very solid feeling experience. Note image #3 where the point of the pencil shows the adapter's pin locking in to a notch in the lens's stock Minolta mount.
01/11/2024
Verified Purchase
Hold out for the 2020 version
I just received the NEW 2020 version of this adapter. It works great on my Sony A7 Riii. I have no problem changing canon lenses on and off of the adapter. It has anti flare treatment on the inside to reduce internal reflections. I highly recommend waiting until these become more widely available.
28/10/2024
Verified Purchase
Works prefectly with my Sony A7iii and a SMC Pentax-M 50mm F1.4 lens
My wife's grandfather gave us his old SMC Pentax-M 50mm F1.4 lens that we found at his house in Toronto. I put it away for a year and haven't thought about it. Eventually it was time for me to upgrade from my Canon 60D to a full frame, I decided to switch brands and go for the hip Sony mirrorless A7iii.
I was so happy but became estatic when I realized there was a trend to use old manual lenses on mirrorless cameras. I did some research and found this K&F K Mount to Sony E-mount adapter. Makes me overall want to get more K-mount lenses!
It works perfectly! It's all metal, feels so sturdy. The E-mount side and the K-mount side when attached to the body and lens respectively feel like a SOLID connection. There is no wobble or insecure feeling.
In terms of use, it of course inherently requires you to use manual mode. There is no glass or electronics to this adapter because the lenses for K mounts did not have autofocus at the time. But using old school manual focus hand control you can get SHARP great photos. Peak focusing works great.
I was so happy but became estatic when I realized there was a trend to use old manual lenses on mirrorless cameras. I did some research and found this K&F K Mount to Sony E-mount adapter. Makes me overall want to get more K-mount lenses!
It works perfectly! It's all metal, feels so sturdy. The E-mount side and the K-mount side when attached to the body and lens respectively feel like a SOLID connection. There is no wobble or insecure feeling.
In terms of use, it of course inherently requires you to use manual mode. There is no glass or electronics to this adapter because the lenses for K mounts did not have autofocus at the time. But using old school manual focus hand control you can get SHARP great photos. Peak focusing works great.
21/10/2024
Verified Purchase
Built-in mechanical stop prevents DoF preview button (but can be removed)
If you hold the Depth of Field preview button (the button opposite the unlock button on the lens), that will manually stop down the aperture. Meaning, you are not just stuck at wide-open aperture. The only minor caveat is that you must hold this button down while you snap the photo. For some reason, the manufacturers of this adapter chose to include a stop that prevents the slider on the back of the lens from moving and thus stopping down the lens. This makes no sense to me why they'd go out of their way to prevent this very useful function.
Even more confusing is why it's so easily removed. You just need some precision screwdrivers and half a brain. Remove the four screws on the silver plate, lift the plate off the adapter, and then you will find one small screw holding the stop in place. Unscrew the screw and remove the stop. Then just reassemble the back plate with the orientation shown in the image (the notched blade is closest to where the text "OM" is printed).
You should be good to go! Now, if you hold the DoF preview button down while snapping your picture, the lens will stop down to whatever aperture you have the ring set to and you will be able to use the lens to its fullest potential. In auto mode, the camera will automatically adjust exposure once the aperture is stopped down.
Even more confusing is why it's so easily removed. You just need some precision screwdrivers and half a brain. Remove the four screws on the silver plate, lift the plate off the adapter, and then you will find one small screw holding the stop in place. Unscrew the screw and remove the stop. Then just reassemble the back plate with the orientation shown in the image (the notched blade is closest to where the text "OM" is printed).
You should be good to go! Now, if you hold the DoF preview button down while snapping your picture, the lens will stop down to whatever aperture you have the ring set to and you will be able to use the lens to its fullest potential. In auto mode, the camera will automatically adjust exposure once the aperture is stopped down.
14/10/2024
Verified Purchase
Incredible value
Solid construction and tight fit. Wouldn't hesitate to order another from them!
13/10/2024
Gallery
These images belong to KENTFAITH end users.
FAQs
A
It’s a little tight on my a7III. I bought the Fotodiox brand for my Nikon glass and prefer the fit a bit more. Still works however, just ended up buying a Fotodiox for my Minoltas as well.
Show More
Q
A
Unlike a tube it won't effect your focus distance nor effect your quality like a doubler. The lens will have more of an effect than anything else. On my Sony a7, I must be sure to use a full frame lens since the sensor is 35mm size
Show More
Video
K&F Concept Canon EF Lenses to Sony E Mount Camera Adapter
Specification
| Adapter | |
|---|---|
| Camera | NEX |
| Lens | EOS |
| Ring Material | |
You might also like
NEW
Arrival
