Secure Transaction
Canon EOS Lens to Canon EOS R Camera Body Lens Mount Adapter
Special
In Stock
- days
- :
- hours
- :
- min
- :
- sec
$27.99
$29.99
6% OFF
Free shipping worldwide
Description
- * 【 Material】High-quality copper and aluminum alloy ;High precision and durable.
- * 【Features】Red dot mark, accurate alignment, Install and remove smoothly.
- * 【Manual Focus】Full manual control, Diaphragm control of the lens is set manually. Supports manual control, manual focus, manual exposure and focus to infinity.
- * 【Please note】 when using the adapter ring for the first time, please turn on the “release shutter w/o lens”option in the menu, otherwise the adapter lens will not be recognized.
- * 【Pre-purchase Verification】 Please ensure your lens mount and camera mount before purchase in case of unnecessary returning. We are here for help if you have any question about adapters.
Unsure your lens mount ? check here
Unsure your camera mount ? check here
Video for verify your lens and camera mount check here
Related Products
$27.99
Shipping
Free shipping worldwide
Accessories
Frequently Bought Together
Top Bestselling Products
HOT
Seller
HOT
Seller
Brand Story
Instructions for use
Attention:
• Manual adapter without autofocus or aperture ring.
• Skillful installation, needn't too much force.
'No Lens Attached' - Warning Message Appears:
• If your camera indicates "lens is not properly installed", please modify the camera settings: 'Menu' -> 'Setup' -> 'Release w/o Lens' -> 'Enable' (Exact naming and location may change depending on camera model). If your lens does not have a manual aperture control ring, it will stop down to its smallest f/stop by default.
• Set camera "release shutter without lens" to enable when using the adapter for the first time, or the camera will fail to recognize the lens and the shutter may not be released.
• Manual adapter without autofocus or aperture ring.
• Skillful installation, needn't too much force.
'No Lens Attached' - Warning Message Appears:
• If your camera indicates "lens is not properly installed", please modify the camera settings: 'Menu' -> 'Setup' -> 'Release w/o Lens' -> 'Enable' (Exact naming and location may change depending on camera model). If your lens does not have a manual aperture control ring, it will stop down to its smallest f/stop by default.
• Set camera "release shutter without lens" to enable when using the adapter for the first time, or the camera will fail to recognize the lens and the shutter may not be released.
Features:
• Lens: EOS Mount Lens
• Camera: EOS R mount Cameras
• Compact and high quality with metal material
• Precise production to ensure the perfect fit
• Diaphragm control of the lens is set manually
• Allows focus infinity
• Elegant clear appearance
• Camera: EOS R mount Cameras
• Compact and high quality with metal material
• Precise production to ensure the perfect fit
• Diaphragm control of the lens is set manually
• Allows focus infinity
• Elegant clear appearance
Infinity focus position:
• The position of the infinity mark [∞] of the telephoto lens is shifted slightly to the positive side to enable focus adjustment even when focus shift is caused due to temperature changes. The shift range is denoted by an L-shaped line, Be sure to check the focus through the viewfinder even when you shoot at infinity.
Note:
• L mount cameras are full-frame mirrorless cameras.
• Adapting APS-frame lens to full-frame camera may generate vignetting, which is not the problem of the adapter. Some cameras could correct it by adjusting to APSC.
• Adapting APS-frame lens to full-frame camera may generate vignetting, which is not the problem of the adapter. Some cameras could correct it by adjusting to APSC.
Reviews (49)
- All Reviews
- Image
Verified Purchase
Excellent Mount
When I got my cheap mirror lens to play with my canon R6 it came with a simple
T2-EOS R mount that didn't fit the camera mount as that well. It had a slight play to it and made me worry about damaging the camera's mount.
This one, on the other hand, is quality.
It fits both the lens and the camera's R mount snuggly as any OEM lens would.
Seems very well made with a good finish relative to the cheap mount made of recycled bottle caps that came with the lens. Excellent,
T2-EOS R mount that didn't fit the camera mount as that well. It had a slight play to it and made me worry about damaging the camera's mount.
This one, on the other hand, is quality.
It fits both the lens and the camera's R mount snuggly as any OEM lens would.
Seems very well made with a good finish relative to the cheap mount made of recycled bottle caps that came with the lens. Excellent,
18/11/2024
Verified Purchase
Geweldige adapter voor het herstellen van oude Nikkor-lenzen naar Canon R
Solid and technically perfect, I was able to restore with the Canon RP, two of my old and very useful lenses: Nikkor 20mm f3.5 and Micro Nikkor 55 f 2.8 including a PK13 adapter to achieve the 1:1 ratio. Everything works fine, of course in manual mode. The device does not read the aperture indicated at 0, but that is not a problem as it is adapted to the lens and the time and ISO can be adjusted. Don't forget to set the cfnIII: Opera menu. /Other, shutter release without lens, set to 1: Activate, otherwise the shutter will not be released. After using the target, I recommend setting it to Disable again. I am adding test photos of the 20mm, the mounted adapter and the menu to be set.
14/11/2024
Verified Purchase
Good!
Really easy to use. It does what it says on the tin very well. It can easily accommodate a heavy telephoto lens. The aperture ring works well and is easy to operate (you can monitor the effects of increasing or decreasing the aperture on your screen). Everything fits neatly, very precise technology. I'm very happy to be able to use my old, high-quality Minolta lenses in this way, especially at this price. This obviously does not have autofocus, but it does not seem to change the image quality. Thank you K&FConcept!
11/11/2024
Verified Purchase
Perfect
Love these , just purchased a eosr100 and have been using these for beautiful close up flowers photos. Soo easy to use they attach perfectly and come with a nice case to keep them in .
09/11/2024
Verified Purchase
ok
good converter
04/11/2024
Verified Purchase
Good construction
Perfect fit
01/11/2024
Verified Purchase
Very good adapter
Very well made adapter. Works with both M42 lenses I have.
25/10/2024
Verified Purchase
Top notch!
With the cost of lenses for mirrorless cameras being insane, Im really happy these adaptors are ou there. Doesnt matter what lens mount is in your bag, these adapters work. Just remember, these force you to go full manual. I set my camera as a fully manual and enable the MF peaking. I adjust the focus, choose the aperture and the camera will select the shutter speed.
This allows you to us some pretty funky lenses. You want to play with M39 mount enlarger lenses and experiment with soap bubble bokeh? This is the way to go.
They fit beautifullly on the camera and lenses.
I have about 4 different adapters from K&F Concept. All are precision fit and worth every penny. Ill be getting more, no question.
This allows you to us some pretty funky lenses. You want to play with M39 mount enlarger lenses and experiment with soap bubble bokeh? This is the way to go.
They fit beautifullly on the camera and lenses.
I have about 4 different adapters from K&F Concept. All are precision fit and worth every penny. Ill be getting more, no question.
20/10/2024
Verified Purchase
well done
very happy
17/10/2024
Verified Purchase
Very good quality
Very nice snug fit on my Canon R6. No adjustment necessary to align up the f/stop markings on the M42 lenses. Everything is manual settings and that's perfect. Just set up your in camera setting for focus peaking and your off to making some great photos with the old amazing M42 lenses.
13/10/2024
FAQs
There are no faqs for this product.
Specification
| Adapter | |
|---|---|
| Camera | EOS R |
| Lens | EOS |
| Ring Material | |
You might also like
$135.99 $74.99
