It is equipped with 120° detecting range which is blazingly fast and makes sure that you don’t miss a single bit of the action whether it is fast moving or slow moving. 

hello,the camera with 48 non-luminous infrared lights, using intelligent night vision imaging technology, night vision distance of 20 meters. 

The memory card supports MICRO SD (TF) card, CLASS 10, less than 32GB. The memory card size is 0.04 x 0.59 x 0.43 inches. Please format the memory card in the camera when using it for the first time. Do not insert or remove the SD card when the camera is turned on. We recommend using genuine brands. 

Find the delayed photo in the menu. Note that the factory default setting is 30 seconds. If the animal stays in front of the camera for less than 30 seconds, no photo will be taken; or try to adjust the sensitivity in the sensor sensitivity 

After the camera is installed, the settings are completed to take two photos, and check the captured photos on the camera screen to determine the shooting location 

Yes, you can find the recording in the settings and choose to turn off 

First, you need to check whether the camera battery is sufficient. When the battery is below 30%, you cannot take pictures at night. You can see the battery in the lower right corner of the camera screen; then format the memory card; find the delay in the menu Take pictures, note that the factory default setting is 30 seconds, but if the animal stays in front of the camera for less than 30 seconds, the picture will not be taken. You can try to set it to 8 seconds, 5 seconds, etc.