To be fair, the falling off may be the lens - I can't tell. Basically it seems like there just aren't enough threads engaging. I am using it on a refurbished (by Nikon) Nikon AF-S 55-300 1:4.5-5.6. I have NOT tried any other filter on the lens.I have the same filter in 52mm and have used it on 2 other lenses (18-55 and 55-200) and it seems to engage more than this bigger filter in the longer lens.As long as you get it seated and remember to twist the filter orientation in the direction of tightening the filter it's okay. I got it backwards and ended up unscrewing the filter (which only seems to be less than a full revolution - less that one full thread) and it fell into dry sand. It doesn't look like it got damaged but I just don't enjoy using it because of the high possibility it may fall off again.And, it's hard to get the threads started.Again, I haven't used any other filter on this lens so it could be the lens too, which is more of a question because the lens was refurbished (although the threads don't look bad or as though they'd been truncated somehow).As for the pictures, I used it to effectively remove glare from a water body. It seems to work fine (as does my 52mm which I've used a lot more). No complaints but I may not see differences between this and a B+W anyway. I can certainly see the difference between this and no filter. I'd buy one again. I think the Tiffen's are a great cross between results and price. When I start seeing artifacts maybe I'll spring for a B+W or other brand.
26/12/2022
Rachel
4
Like it.
I really liked this filter. I got this filter with the intention of the Solar eclipse that just occured. I am very happy that I got it and will be using again.
13/11/2022
A. M. C.
5
Beautiful quality lens!
A good quality filter is a must for any lens. This filter definitely has the high-quality I was looking for.
19/10/2022
M. Erb
5
Great quality for the price but might give you vig
This is a review of K&F Concept 62mm Black Diffusion 1/4 Effect & Variable ND2-ND32 ND Filter 2-in-1 for Camera Lens with 28 Multi-Layer Coatings (Nano-X Series)I bought this to use with my Sony ZV-1 on which I have a Newer LS-18 Wide Angle/Macro conversion lens 0.75x. I was disappointed, but not surprised that there was very apparent vignetting at the corners of the photos. This is due to the wide angle lens. You can crop the photos in post production to eliminate the vignetting. Not ideal but that's what you have to do.If you use this on a normal lens and aren't stacking additional filters, I'm quite sure you won't have an issue with vignetting.The 62mm variable ND, 1/4 diffusion filter is great. The filter allows you to shoot longer exposures at slower shutter speeds in bright light conditions allowing you to get awesome shots that would otherwise be impossible to get without the filter. It adjusts to give you between 1 to 5 stops reduction. And since it's also a 1/4 effect diffusion filter, it gives a somewhat soft diffusion effect to the photo and is great to use for portraits.This is very nice quality filter and priced less than other comparable filters.
21/08/2022
John W
4
Looks fine so far
Filter looks fine, however the Canon lens cap for the camcorder did not fit very well on the filter, so I will have to get another lens cap.
19/07/2022
Sethu Manalan
5
Great UV Protectror
Tiffen 62mm UV Protection Filter
This is wonderful lens protector, which not only protects UV radiation but also helps protecting the SLR lenses
16/07/2022
Boo Choo
5
The Tiffen 62mm UV Protection Filter is great to p
Item arrives on time. The Tiffen 62mm UV Protection Filter is great to protect the Pentax KS2 Lens. I like it.
02/07/2022
brandon myers
5
This is one of the best telescopes ive had.
This telescope has great viewing capabilities, but i wish i could find the solar filter that goes with it.
30/12/2021
Related Faq
Q
Can you give me the outer diameter of your 58mm magnetic variable nd filter (KF01.1849). I need to measure my lens hood to see if the filter will allow me to have my lens hood mounted when I have the 58mm variable ND mounted.
A
the outer diameter is 62mm.
Q
What size lens cap would you need for this filter if you had a 55mm filter
A
55mm 2-in-1 filter requires a 62mm lens cap.
Q
will this fit in a rokina 12mm lens for fuji x series?
A
If the filter size for your lens any of these adapter ring ( 52mm/ 58mm/ 62mm/67mm/ 72mm/ 77mm/ 82mm) then yes.
Q
Doe this fit a nikon coolpix b500?
A
Yes it will fit, but you would need a 58mm to 62mm adapter.
Q
Does this mounting system support a CPL filter?
A
There are 7 filter ring adapters, included 52mm/ 58mm/ 62mm/67mm/ 72mm/ 77mm/ 82mm, so it support a CPL filter.