This light is amazing!!! Get it get it get it! I took like 600 shots on top of my sony a7 and the battery was still half.

First off, it's a nice looking adapter that serves the purpose of connecting your SATA and IDE drives to your PC, or maybe smartphone. The adapter housing is plastic but is well built. The data port to the adapter is USB-C. It comes with two cables that will connect from USB-C to USB-C or USB-C to USB-A. It also comes with a 12V power cable that you'll need when connecting a 3.5 inch IDE/SATA drive to the device that requires the 4-pin PWR connector. The device can be turned on and off with a small switch and it has a blue LED indicator when activity it taking place.The description, in my opinion, is a bit misleading. It tells you that it's USB 3.2 Gen1 (Older 3.0 designation at 5Mbps) and that may very well be true about the USB-C port, but the SATA connector is for sure SATA II based on my speed tests. Reference the attached pictures that show the speed tests. To be fair, it doesn't say anywhere that that adapter is SATA III, but it does mention 5Gbps speeds, which you aren't going to obtain using a SATA II connection. I ran a separate test with another SATA III adapter using the same drive and got very different results for read/write. You can also reference that in the attached pics.All of my tests were done with a KingSpec 512GB SSD with SATA connection. I didn't have any other drives laying around to test so I'm hoping that the other adapter connections are working fine when I need them later on.Overall, this a decent adapter but I would recommended it for data recovery and not for daily use, substituting this for an external enclosure that supports SATA III speeds. When I come across old (maybe even newer) legacy drives that I need to recover data from, this adapter will be very useful and is why I got it. Speeds won't necessarily be high priority in that situation. But, I feel as though it should support faster speeds as it makes reference to 5Gbps and that's why I have to take a star away. Decent product but know what you're buying before you do. 4 stars.

This is the best camera in its class.Canon Digic III processors are made in Japan and are used in the EOS ID Mark III professional camera, while Nikon processors are made in China. Only the Nikon cameras that cost over $1,500 processors are made in Japan.Why do Nikon do this? Also the image stabilizer is built in the lens which is a better philosophy. This camera has 12 mp and a live view. WoW!!!!

I love this mount. It is not compatible with the Nikon FTZ adapter unless you move it from the body to the adapter or buy another mount just for the adapter. I’ve hike a couple mountains and bustled through crowds without fail using this mount.

Memoria esterna perfetta per il mio Samsung Galaxy A7

Part 1 - Minolta MD to Sony NEX adapterTechnically, it slightly overshoots infinity but the issue is easily corrected by dialing back the focus ring just a tad --- Not exact but clearly better than not-at-all.Although very light due to extensive aluminum usage, the build quality and fit-and-finish of the adapter is superb. Connections on the lens and camera mount sides are tight and precise --- absolutely, zero slop. The top of the lens release button is flattened making the lens removal process very easy and comfortable.Other notes:- There are no electrical connections so focus and zoom must be done manually on the lens itself- When mounting the lens, turn the adapter clockwise till you hear a "click"- Tested with a Minolta 85mm f/1.7 Rokkor-X MD lens mounted to a Sony a6000 camera-----------------------Part 2 - Nikon Ai to Sony NEX adapterEdit: Based on my positive experience with the Minolta MD adapter, I also purchased the Nikon Ai adapter later.As with the Minolta MD adapter, the Nikon Ai version focuses beyond infinity a tiny bit. Fortunately, the same solution applies - dial back the focus ring and the horizon will become crystal clear. The build quality is impeccable and the finish is smooth and clean of burrs or machine marks. Connections on both sides are taut and precise with zero play.Additional notes for Nikon Ai adapter:- No electrical connections present so focus and zoom must be done manually on the lens.- Unlike the Minolta MD adapter, mounting the lens for Nikon adapter requires a counter-clockwise turn until you hear the "click" of the locking mechanism- Tested with a Nikon Micro Nikkor 55m f/2.8 Ai-S MF lens mounted to a Sony a6000 camera

I use it for carrying my mirrors Sony a7 III, my DJI RSC2 and accessories, enough room for all of it.

Used this to secure my Sony Alpha a7 III to my backpack while hiking Yosemite. Very secure and easy to clip on and off. It was a bit hard to add it to my Gregory backpack strap as it was a bit thick but was able to do so nonetheless.