Adapter E Mount Mft
Related Reviews
Phillip
5
Five Stars
This clamp is AWESOME. It is so versatile. You can mount to poles, doors, edges of things, and you can use it to mount a GoPro camera to just about anywhere with the optional "Sametop Replacement Tripod Mount Adapterm https://www.amazon.com/Sametop-Replacement-Adapter-Compatible-Session/dp/B0126KXDN2/ref=sr_1_1?ie=UTF8&qid=1536940665&sr=8-1&keywords=Sametop+Replacement+Tripod+Mount+Adapter&dpID=51ak1cLKv6L&preST=_SY300_QL70_&dpSrc=srch
27/01/2023
Aure Aure
5
Simple to install. Works great.
The media could not be loaded.


















 I really like this solar wireless backup camera kit. All you really have to do to get it working is charge the camera, activate it with the included card pin and power up the monitor. Just mount the camera panel (4” x 3”) wherever you want using the double-sided 3M tape, slide the camera in and mount the monitor using the suction cup mount. For monitor power you can use the adapter that plugs into the 12 volt accessory socket or hardwire it (the adapter has an on-off switch). It’s pretty simple. I’ve installed wired cameras and it’s not much fun. This is so much easier. Almost anyone should be able to set this up. I tested the camera inside the house (too much rain at the moment to mount the camera) and it works well (see video). The picture is clear. There’s a bunch of settings you can adjust to tailor the camera to fit your needs. For testing I turned off the backup guidelines and set the camera turnoff time to manual. The instructions are quite clear and there’s a link and QR code for an installation video. This camera is well worth the money.
14/01/2023
Jonathan B.
4
Nice Monopod with Mediocre head
This is a great monopod...especially for a micro four thirds (MFT) setup. Light, quick to set up, and sturdy, it has almost everything I was looking for. I wasn't crazy about the head though...and upgraded it to a MeFoto type head...big improvement for a nice monopod.
09/01/2023
J. Wright
5
Small, cheap & reliable tripod
I use this to travel with. Great little tripod to use with my go pro (i use the go pro tripod mount adapter) for stationary shots
23/07/2022
Sinbad
4
Solid mount. Possibly the best accessory in my kit
I love this mount. It is not compatible with the Nikon FTZ adapter unless you move it from the body to the adapter or buy another mount just for the adapter. I’ve hike a couple mountains and bustled through crowds without fail using this mount.
07/06/2022
Ashy Kutcher
4
Need Camera Mount Adapter for Insta360 Cameras
Marketed for GoPro, Insta360 and many other action cameras however if you have an Insta360 camera (or others) you will need a camera mount adapter not included with this kit that costs around $10.I have an Insta360 X2 and I'll probably just buy the Cage Protection Metal Frame for$28. It gives the option to mount additional accessories such as microphone, lights, etc.
21/01/2022
Michaels
5
A great value for beginning or experienced astro!
I got these binocs and the Vanguard aluminium binoc tripod adapter (I didn't even consider using the plastic adapter provided) to use as astro spotters for my DSLR tracking mount. First light was tonight. In preparation, this afternoon I got the eyepieces set for my eye differences (I wear glasses and have a slight astigmatism) and I added the tripod adapter (it went on easily) and then I added the setup to a monopod with a pistol grip ball head mount. I spent some time looking around the neighborhood and I was quite impressed with the resolution and no collimation error. Tonight I took the setup out and I observed Jupiter with Io, Europa, Ganymede and Callisto hanging down like a string of pearls - quite a special view, sorry my mount and camera was inside, all packed up. I then swiveled over to the Orion Nebula and it looked great. I poked around for a bit and ended up with the Pleiades filling the FOV. Were they a little fuzzy out at the very edges of the FOV? - Yes. A big deal? - No. Can these binoculars split a double? - Maybe on a tripod or with a parallelogram mount with great seeing. But for $60 these binocs are an incredible deal; I could not be happier with my purchase. I thought I was just getting some spotting gear for my DSLR work; instead, I got a "grab and go" setup I can leave in the car and not worry about, or toss in my luggage for some out of town observing. This gear with a decent tripod mount and pistol grip ball head on a monopod is so easy to use, you'll need a really big excuse not to head out and do some viewing.
10/05/2021
ConSueMur
5
You get 2 mounts in one. Mount the bracket on its
I love the versatility of this mount. I can mount the primary clamp at a fixed angle, or I can mount the adapter so the clamp can be rotated to any angle.
26/04/2021
Related Faq
Q
Is it compatible with sony a7iii??
A
Yes, it will fit any Sony e mount body, either full frame (a7..., a9...), or aps-c (like a6500, etc) 
Q
Will this work for a panasonic lumix g7?
A
hello panasonic lumix g7 is m3/4 mount, so the adapter ring could not work for panasonic lumix g7 
Q
Too loose/there is gap between lens and adapter ring
A
  1. If there is ever any more than a slight amount of rotational play, you may want to try tightening the lens mount adapter so it will hold the lens tighter to the mount. There are 3 flanges in the middle of the adapter (what the lens locks onto) that are split open slightly, this gap is what gives the tension that holds the lens tight to the body. Over time and with use these gaps decrease in size, no longer pulling the lens tight to the adapter, which allows the lens to move inside the mount more than it should.
  2. To tighten the fit, get a slim metal object (a #1.5 or #2.0 small flat eyeglass screwdriver is ideal) and insert it into the slit to open it up just a little bit (see images below, make sure to do it to all 3 evenly). The more you open the gap, the tighter the lens will be to the adapter; too much and the lens will have a hard time mounting so make sure to do it just a little bit at a time to all 3 flanges evenly, it doesn’t take much at all to get a tight fit.Note: please do not use too much strength, or the shrapnel will be damaged.
 
Q
Does this adapter allow for canon fd lenses to focus to infinity on sony e-mount mirrorless cameras?
A
yes, i had no problems with infinity focus with this adapter. the only FD mount lens i use anymore with my sony is a vivitar 20mm, and i pretty much only shoot infinity focus with it. 
Q
is this mount adapter work with panasonic GX-7 body & nikkor dx 18-200 lens.
A
The adapter will mount the lens and you will be able to use it manually. However, my copy of the adapter does not allow the lens to be fully mounted all the way until it clicks into place. It doesn't quite make it, but it's still very solidly mounted. Also, the manual aperture linkage doesn't work properly (on my copy, at least) so exposure is controlled only by shutter speed and/or ISO. You will be able to manually focus and zoom the lens but no VR, of course. It will be a frustrating experience. Instead, get a 14-140 Panasonic zoom if you can afford it! 
Related Video
K&F CONCEPT Canon FD to MFT- M4/3 LENS ADAPTER Review
K&F Concept M42-M4/3 Objektiv Adapter für MFT Kameras
K&F Concept Sony a6000 mount adapter
Related Blog