Related Blog
Anamorphic Lens Adapter 1.5
55mm Variable ND3-ND1000 ND Filter (1.5-10 Stops) Neutral Density Lens Filter with 24 Multi-Layer Coatings for Camera Lens Nano-Dazzle
$37.99
Save Instantly
Add to Cart
77mm Variable ND3-ND1000 ND Filter (1.5-10 Stops) Neutral Density Lens Filter with 24 Multi-Layer Coatings for Camera Lens Nano-Dazzle
$49.99
Save Instantly
Add to Cart
72mm Variable ND3-ND1000 ND Filter (1.5-10 Stops) Neutral Density Lens Filter with 24 Multi-Layer Coatings for Camera Lens Nano-Dazzle
$49.99
Save Instantly
Add to Cart
49mm Variable ND3-ND1000 ND Filter (1.5-10 Stops) Neutral Density Lens Filter with 24 Multi-Layer Coatings for Camera Lens Nano-Dazzle
$34.99
Save Instantly
Add to Cart
52mm Variable ND3-ND1000 ND Filter (1.5-10 Stops) Neutral Density Lens Filter with 24 Multi-Layer Coatings for Camera Lens Nano-Dazzle
$37.99
Save Instantly
Add to Cart
62mm Variable ND3-ND1000 ND Filter (1.5-10 Stops) Neutral Density Lens Filter with 24 Multi-Layer Coatings for Camera Lens Nano-Dazzle
$44.99
Save Instantly
Add to Cart
67mm Variable ND3-ND1000 ND Filter (1.5-10 Stops) Neutral Density Lens Filter with 24 Multi-Layer Coatings for Camera Lens Nano-Dazzle
$44.99
Save Instantly
Add to Cart
46mm Variable ND3-ND1000 ND Filter (1.5-10 Stops) Neutral Density Lens Filter with 24 Multi-Layer Coatings for Camera Lens Nano-Dazzle
$34.99
Save Instantly
Add to Cart
Related Product
Prime Day
Prime Day
$34.99
Prime Day
Prime Day
$24.99
Related Reviews
Works Great
I bought this to work with the Moondog 12.5mm anamorphic lens and it works great. I’ve tested it in blazing sunlight with no clouds, which was the brightest possible outdoors condition attainable. The filter was able to be dark enough for proper exposure at a fixed shutter speed of 1/48 for 24fps.
04/10/2022
Much needed QoL
There’s not much you can say about the adapter. I mean it works so what else would you expect? Well, it is well constructed and makes a nice click when installing your lens. I read some of the reviews on the cheaper alternatives and saw reviews mentioning the product feels cheap and how the lens are not firmly and securely attached. I rather not risk it but others have without issues. If you’re on a budget, do look at the cheaper alternative. If you can afford it then this is the one you want.
05/05/2022
Adapter works fine
The adapter is good, delivery was also very fast, i got it just in 1 day.. But if you really wanna use EF or EF-S lens in mirrorless cameras, you have to keep in mind that the sharpness will decrease by a little amount and you you have to focus the subject very correctly, otherwise the picture will become blurry(specially for the prime lens)..
04/05/2022
Perfect for the "Film Look". At a reasonable price
Purchased this for a new anamorphic lens and it's a fantastic buy. Absolutely no color shift, and blooms the highlights subtly. I would suggest the 1/8 strength unless you are going for a full on dreamy look. Tiffen has always made quality filters. This Black Pro Mist is no different. I highly recommend it.
09/03/2022
Excellent lens, quality build.
I am using this lens for Canon M50 Camera. You will need EOS adapter. I have attached 3 photos taken with this lens.
08/01/2022
Anamorphic Lens is Great!
The pictures and video you can get out of the drone with the anamorphic are pretty incredible. The other thing that’s nice is that the lens flares aren’t so intense as to be distracting. Everything looks quite professional.With the ND filters, you can also get very long exposure shots, even in a fairly bright environment.
08/10/2021
Works Well on Tube Up to 1.5" Outside Diameter
This is a well built adapter. It's a very cool mechanism. However, one of the photos in the listing shows that the jaws open up to 2.28". If you were fastening to something like a table top, you could go up to a table top of about 2.25" thick. However, don't be confused. If fastening to a tube or pipe, comments from other users indicate that the biggest tube/pipe outside diameter that can be accommodated is about 1.5". The clamp wouldn't work on the 2" OD tubing I was using. My work around was to drill a cross hole in the pipe for a 1/4" x 3" long bolt that extended about an inch beyond the tube. The adapter easily clamped to the bolt. It would be nice if the add copy had pointed out that the maximum pipe/tube od that can be handled is 1.5". Nonetheless, I am very happy with this product.
15/09/2021
They all fail. Waiting for this one to fail.
Holding up well so far. I am happy if I get 1.5 years out of this.
10/07/2021
Related Faq
Q
I have a rf camera m2 and some nikon ai lens. if i use this adapter to connect both, can we see the focus frame “overlap” in the viewfinder?
A
Dear Customer,
this adapter isn't suitable for your lens and camera.
Q
Does the autofocus work with the Nikon lens on the Canon camera?
A
This adapter is non-electronic and so will not enable electronic communication between lens and camera, so no autofocus.
Q
I have a nikon d3100 camera and need an adapter to fit a minolta 75-300 lens. does this adapter do that are can you direct me to one that would?
A
K&F have a list of which adapter will work for each lens to camera combination they support
Q
Too loose/there is gap between lens and adapter ring
A
- If there is ever any more than a slight amount of rotational play, you may want to try tightening the lens mount adapter so it will hold the lens tighter to the mount. There are 3 flanges in the middle of the adapter (what the lens locks onto) that are split open slightly, this gap is what gives the tension that holds the lens tight to the body. Over time and with use these gaps decrease in size, no longer pulling the lens tight to the adapter, which allows the lens to move inside the mount more than it should.
- To tighten the fit, get a slim metal object (a #1.5 or #2.0 small flat eyeglass screwdriver is ideal) and insert it into the slit to open it up just a little bit (see images below, make sure to do it to all 3 evenly). The more you open the gap, the tighter the lens will be to the adapter; too much and the lens will have a hard time mounting so make sure to do it just a little bit at a time to all 3 flanges evenly, it doesn’t take much at all to get a tight fit.Note: please do not use too much strength, or the shrapnel will be damaged.
Q
Why camera indicated “lens is not properly installed”?
A
If your camera indicated "lens is not properly installed", please modify the camera menu settings. Usually called the "release the shutter the lens is not installed", you can modify the settings to allow. Specifically refer to the camera manual.Following are some examples:
-
MFT（M4/3 mount camera）'Lens Not Found' - Warning Message Appears
For Panasonic Lumix:
The camera needs to be set to function without a MFT-Mount lens attached. You can do this by changing the following camera setting:
'Menu' -> 'Custom Menu 5' -> 'Shoot W/O Lens' -> 'On'
(Exact naming and location of this option may change depending on camera model)
-
Fujifilm X mount camera, The camera needs to be set to function without a GFX-Mount lens attached. You can do this by changing the following camera setting:
'MENU' -> 'SETUP' -> 'BUTTON/DIAL SETTING' -> 'SHOOT WITHOUT LENS' -> 'ON' (Exact naming and location of this option may change depending on camera model) Choose ON to enable the shutter release when no lens is attached.
-
Sony E mount camera, 'No Lens Attached' - Warning Message Appears
The camera needs to be set to function without a E-Mount lens attached. You can do this by changing the following camera setting:'Menu' -> 'Setup' -> 'Release w/o Lens' -> 'Enable'
(Exact naming and location of this option may change depending on camera model)
-
Nikon 1-Series mirrorless camera , 'Check lens. Pictures can only be taken when a lens is attached' - Warning Message Appears
With a Nikon 1-Series camera (such as the J2), you will need to make sure the camera is in 'Manual' exposure or shooting mode and the focus selection is also set to manual. When in any other mode the camera tries to take control of the lens which is not possible as the adapter does not have any contact with the camera circuitry, so you get the lens check warning as the camera does not think there is a lens attached.
-
'EOS M mirrorless camera ,'No Lens Attached' - Warning Message Appears
The camera needs to be set to function without a EF-M Mount lens attached. You can do this by changing the following camera setting:
'Menu' -> 'Custom Menu' -> 'Custom Function 7' -> Select 'Release shutter w/o lens'
(Exact naming and location of this option may change depending on camera model)
-
Konica Minolta:
For Konica Minolta and "No Lens Attached"
Custom Menu 3
First item "Shutter Lock"
Set it to "Off: no lens"
(Depending on camera model "Shutter Lock" May be in different menu location)
-
'Samsung NX 'No lens.' - Warning Message Appears
The adapter is designed to trigger a sensor inside the camera body itself so no setting needs to be changed. If the error message is coming up with one of our adapters attached, then it is possible that the adapter is not hitting that sensor the way that it should. Usually rotating the adapter slightly in the mount, or un-mounting and remounting the adapter clears the problem with no further action needed. If that doesn't solve the problem, then the best course of action would be to swap out the adapter you have with a replacement.
Related Video
UNBOXING k&f concept lens adapter + Minolta X 700!
New design lens adapter series from K&F Concept
K&F M10111 M42 Lenses to Fuji X Lens Mount Adapter