Angenieux 10mm C Mount Lens
Related Faq
Q
Has anyone experienced any colour casting with these filters? Also, any vingetting on ultrawide lenses such as the Tokina 11-16 / 11-20? Thanks
A
Works fine throughout the range on my 10-20 wide angle lens on a cropped sensor. Although I suspect that 10mm would be the absolute limit, any wider and I think vignetting would occur. I don't use the extreme 10mm end that often however I was expecting some vignetting but I seem to have been lucky and gotten away with it. This is a really nice set of filters. Hope this helps. 
Q
Will this work on my sony a6000 and tokina minolta 100-300mm macro zoom?
A
Yes 
Q
Too loose/there is gap between lens and adapter ring
A
  1. If there is ever any more than a slight amount of rotational play, you may want to try tightening the lens mount adapter so it will hold the lens tighter to the mount. There are 3 flanges in the middle of the adapter (what the lens locks onto) that are split open slightly, this gap is what gives the tension that holds the lens tight to the body. Over time and with use these gaps decrease in size, no longer pulling the lens tight to the adapter, which allows the lens to move inside the mount more than it should.
  2. To tighten the fit, get a slim metal object (a #1.5 or #2.0 small flat eyeglass screwdriver is ideal) and insert it into the slit to open it up just a little bit (see images below, make sure to do it to all 3 evenly). The more you open the gap, the tighter the lens will be to the adapter; too much and the lens will have a hard time mounting so make sure to do it just a little bit at a time to all 3 flanges evenly, it doesn’t take much at all to get a tight fit.Note: please do not use too much strength, or the shrapnel will be damaged.
 
Q
What kind of rear and front caps would I buy to go on this since it doesn't come with any?
A
I don't think you need any. There is no glass. 
Q
is this mount adapter work with panasonic GX-7 body & nikkor dx 18-200 lens.
A
The adapter will mount the lens and you will be able to use it manually. However, my copy of the adapter does not allow the lens to be fully mounted all the way until it clicks into place. It doesn't quite make it, but it's still very solidly mounted. Also, the manual aperture linkage doesn't work properly (on my copy, at least) so exposure is controlled only by shutter speed and/or ISO. You will be able to manually focus and zoom the lens but no VR, of course. It will be a frustrating experience. Instead, get a 14-140 Panasonic zoom if you can afford it! 
Related Video
K&F Concept® Lens Mount Adapter for Canon EOS EF mount Lens to GH4
K&F M10101 M42 Lenses to Sony E Lens Mount Adapter
K&F M10111 M42 Lenses to Fuji X Lens Mount Adapter
Related Blog

10mm C Mount Lens 10mm E Mount Lens 10mm Sony E Mount Nikon 10mm F Mount Canon G15 Macro Adapter 10mm X Mount Lens Angenieux 25mm F 0.95 C-mount Lens Angenieux C Mount Lens Angenieux Sony E Mount Adapter Angenieux Sony E Mount

Tamron 70-200 Nikon Mount 18-135mm Sony E Mount T Adapter Canon To 1.5 Invc Zoom Lens Adapter Canon Nikon Series E Adapter Fujifilm X Leica M Mount Lenses On Nikon Z7 Best Cheap 2.8 F Lens Efs Mount Hasselblad 1600f Lens Mount Olympus Om 1 Button On Lens Mount Nikon F Mount Refurbished Lenses