67mm should also be stenciled on the front edge of the lens somewhere. If so, then you should be good to go. It should be on the lens because a lens cap can be lost or broken. 

Unfortunately this is for adapting lenses to Olympus' modern digital Micro 4/3 cameras. It won't work with the Pen FT or similar half-frame film cameras, and you most likely won't find anyone making adapters for these. 

hello Nikon-Nikon 1 fit for nikon AI/AF mount lens and nikon micro single camera body. it not fit for nikon DSLR camera ， could you pls pls let us know your lens and camera specific model? thanks 

FD-EOS fit for Canon FD mount lens and canon EF mount camera body. canon 60d is EF mount, so the adapter ring can work with your camera, but you need to check your lens mount. could you pls let us know your lens specific model? service(AT)kentfaith(DO NOT)com, Please note: It is not same between Canon FD mount and EF mount, this adapter ring is only for Canon FD mount lens, please contact us if you want to purchase for Canon EF mount lens. 

No, this adapter is for the older manual focus Minolta Rokkor MC and MD lenses. If you want to autofocus and aperture control you will need the Sony LA-EA4. (the lower cost Sony LA-EA3 will electronically connect A mount lenses but you will have to manually focus.)