67mm should also be stenciled on the front edge of the lens somewhere. If so, then you should be good to go. It should be on the lens because a lens cap can be lost or broken. 

Unfortunately this is for adapting lenses to Olympus' modern digital Micro 4/3 cameras. It won't work with the Pen FT or similar half-frame film cameras, and you most likely won't find anyone making adapters for these. 

For camera with telephoto zoom lens, you need to buy a tripod mount ring additionally or telephoto lens bracket for better balance) 

FD-EOS fit for Canon FD mount lens and canon EF mount camera body. canon 60d is EF mount, so the adapter ring can work with your camera, but you need to check your lens mount. could you pls let us know your lens specific model? service(AT)kentfaith(DO NOT)com, Please note: It is not same between Canon FD mount and EF mount, this adapter ring is only for Canon FD mount lens, please contact us if you want to purchase for Canon EF mount lens. 

The adapter will mount the lens and you will be able to use it manually. However, my copy of the adapter does not allow the lens to be fully mounted all the way until it clicks into place. It doesn't quite make it, but it's still very solidly mounted. Also, the manual aperture linkage doesn't work properly (on my copy, at least) so exposure is controlled only by shutter speed and/or ISO. You will be able to manually focus and zoom the lens but no VR, of course. It will be a frustrating experience. Instead, get a 14-140 Panasonic zoom if you can afford it!