The adapter for a EOS body to a Canon FD manual is the adapter needed. The Canon AE1 uses the FD/FL lens mount. The one I purchased works without a hitch. Mine is a K&F Concept Pro lens mount for Canon FD, FL lenses. From a F1 to a 5D Mark 4 with no issue. 

I have the Nikon F mount version and it works with the GH5. It's all manual focus, of course. There is no lens data transmitted to the camera. 

FD-EOS fit for Canon FD mount lens and canon EF mount camera body. canon 60d is EF mount, so the adapter ring can work with your camera, but you need to check your lens mount. could you pls let us know your lens specific model? service(AT)kentfaith(DO NOT)com, Please note: It is not same between Canon FD mount and EF mount, this adapter ring is only for Canon FD mount lens, please contact us if you want to purchase for Canon EF mount lens. 

1. As Canon’s EOS lenses are electronically controlled，most Canon EF mount lenses do not feature a manual aperture ring，so when used on our EOS-M4/3, which is a full manual operation adapter ring, the aperture could not be transferred to the camera, it will stop down to its smallest f/stop by default.
2. Some buyer mentioned could not adjust the aperture, actually this is because your lens does not have the aperture control function, If your lens does not have a manual aperture control ring, it will stop down to its smallest f/stop by default
3. You could set your aperture via this way, but we do not suggest to use this way: You can control the f-stop by putting the lens on an EOS body, stop it down using the DOF preview button, and while holding the button down taking the lens off the camera. You can then transfer the lens to the M4/3 camera, and it will retain the f-stop.

 

yes, i had no problems with infinity focus with this adapter. the only FD mount lens i use anymore with my sony is a vivitar 20mm, and i pretty much only shoot infinity focus with it.