We installed it on our Canon RF 24-105 lens and it was possible to use the lens hood on this lens because the lens hood attaches to the lens via the bayonette mount which is on the outside of the lens diameter and the magnetic filter adapter screws into the thread on the inside of the lens. 

67mm should also be stenciled on the front edge of the lens somewhere. If so, then you should be good to go. It should be on the lens because a lens cap can be lost or broken. 

Yes just be to make sure the cable has the quality you need you adjust the zoom for the camara 

Unfortunately this is for adapting lenses to Olympus' modern digital Micro 4/3 cameras. It won't work with the Pen FT or similar half-frame film cameras, and you most likely won't find anyone making adapters for these. 

FD-EOS fit for Canon FD mount lens and canon EF mount camera body. canon 60d is EF mount, so the adapter ring can work with your camera, but you need to check your lens mount. could you pls let us know your lens specific model? service(AT)kentfaith(DO NOT)com, Please note: It is not same between Canon FD mount and EF mount, this adapter ring is only for Canon FD mount lens, please contact us if you want to purchase for Canon EF mount lens.