What is there to say? Nikon is always nikon, reliable and great flash.

This strap is tough, and I like it. I have Nikon D850 and before to start using the strap I need it to test it. You can see from the picture that this strap hold 25lb without problems, and I was even jumping with 15lb hooked to the strap with no issue. The design is simple, the strap is to long for me and the instructions could be better. It took me a while to adjusted , but now is good to go. I can even change my lenses with one hand, and is so easy to unhooked the camera from the strap.I buying second strap for my backup camera as well.You will have fun with this strap just be careful not to hit your display or lenses if the camera is too low from the hip.

This was put to the test on a demanding commercial job where the old style monitor sat far away from our cctv setup, via coax/bnc. We already had adapters for the hdmi output to convert to bnc/coax,then breakout again on the other end and then this adapter worked where others failed.Nice to have the flexible wire as well instead of a tight adapter.

I love this mount. It is not compatible with the Nikon FTZ adapter unless you move it from the body to the adapter or buy another mount just for the adapter. I’ve hike a couple mountains and bustled through crowds without fail using this mount.

Part 1 - Minolta MD to Sony NEX adapterTechnically, it slightly overshoots infinity but the issue is easily corrected by dialing back the focus ring just a tad --- Not exact but clearly better than not-at-all.Although very light due to extensive aluminum usage, the build quality and fit-and-finish of the adapter is superb. Connections on the lens and camera mount sides are tight and precise --- absolutely, zero slop. The top of the lens release button is flattened making the lens removal process very easy and comfortable.Other notes:- There are no electrical connections so focus and zoom must be done manually on the lens itself- When mounting the lens, turn the adapter clockwise till you hear a "click"- Tested with a Minolta 85mm f/1.7 Rokkor-X MD lens mounted to a Sony a6000 camera-----------------------Part 2 - Nikon Ai to Sony NEX adapterEdit: Based on my positive experience with the Minolta MD adapter, I also purchased the Nikon Ai adapter later.As with the Minolta MD adapter, the Nikon Ai version focuses beyond infinity a tiny bit. Fortunately, the same solution applies - dial back the focus ring and the horizon will become crystal clear. The build quality is impeccable and the finish is smooth and clean of burrs or machine marks. Connections on both sides are taut and precise with zero play.Additional notes for Nikon Ai adapter:- No electrical connections present so focus and zoom must be done manually on the lens.- Unlike the Minolta MD adapter, mounting the lens for Nikon adapter requires a counter-clockwise turn until you hear the "click" of the locking mechanism- Tested with a Nikon Micro Nikkor 55m f/2.8 Ai-S MF lens mounted to a Sony a6000 camera

This is certainly worth the money, but recommend you test. On desktop (with adapter) I got hiss, but on Surface pro laptop (with adapter) I did not.. nice and clear. The 16' length is bonus mostly, but tangles when taking out of storage and takes a few minutes to straighten. As I said, worth the 12 bucks and change. I actually got this for sound on phone when taking video. Learned lesson: when you get more than 6' away with phone, audio is very bad. I think this will solve problem without going to the way more expensive wireless solution.

I like how the AF of my EF lens attached to the Commlite AF adaptor EF-EOS R, is not affected. The camera and lens respond rapidly to capture moving subjects.The only thing I don’t like is that the lens feels a smidge loose in the adaptor, but it does not affect the image quality or how the camera responds (if that made sense)Overall very pleased with price for what you get.

I just got them so they are still new. Now let’s really test them out!