67mm should also be stenciled on the front edge of the lens somewhere. If so, then you should be good to go. It should be on the lens because a lens cap can be lost or broken. 

Unfortunately this is for adapting lenses to Olympus' modern digital Micro 4/3 cameras. It won't work with the Pen FT or similar half-frame film cameras, and you most likely won't find anyone making adapters for these. 

FD-EOS fit for Canon FD mount lens and canon EF mount camera body. canon 60d is EF mount, so the adapter ring can work with your camera, but you need to check your lens mount. could you pls let us know your lens specific model? service(AT)kentfaith(DO NOT)com, Please note: It is not same between Canon FD mount and EF mount, this adapter ring is only for Canon FD mount lens, please contact us if you want to purchase for Canon EF mount lens. 

1. Adapting APS-frame lens to full-frame camera, it may generate vignetting, some cameras could correct it by adjust APSC, please contact us and provide your lens&camera model to check the way to correct it.
2. Adapting full-frame lens to APS-frame camera (i.e: large format to medium format, medium format to 35mm, 35mm to micro 4/3) provides excellent edge-to-edge sharpness. The smaller image field helps minimize the effects of lens distortion and aberration by using the 'sweet spot' or center of the larger lens image circle. and it will magnify the focal length by 1.6 on Canon, 1.5 on Nikon and Sony，2.0 on M4/3 camera.

 

1. Canon DSLR mount(Canon DSLRs, e.g. Rebel Series, 700D 650D 600D 550D 7D 60D 7D etc) is called EF, usually expressed by EOS, and Canon mirrorless camera(Canon EOS-M mirrorless cameras like M1 M2 M3) was usually expressed by EOS M
2. Nikon DSLR mount(Nikon DSLRs, e.g. D40 D70 D3100 D3200 D3300 D5100 D5200 D5100 D7100 etc) is called AI or F, usually expressed by Nikon/AI, and Nikon mirrorless camera(Nikon 1 series mirrorless cameras like N1 1 V1 V2 V3 S1 S2 J1 J2 J3 J4 AW1 ect) was usually expressed by Nikon1