Kipon Autofocus Lens Mount Adapter
Related Product
Pentacon 6 Kiev 60 Lenses to M42 Lens Mount Adapter K&F Concept M27241 Lens Adapter
Prime Day
Prime Day
Pentacon 6 Kiev 60 Lenses to M42 Lens Mount Adapter K&F Concept M27241 Lens Adapter
$24.99
K&F Concept Lens Mount Adapter Compatible with Hasselblad V Mount Lens to Pentax 645 Mount P645 645D 645N
Prime Day
Prime Day
K&F Concept Lens Mount Adapter Compatible with Hasselblad V Mount Lens to Pentax 645 Mount P645 645D 645N
$29.99
Beschoi Canon FD FL Lens to Canon EOS EF Mount Camera Body with Glass K&F Concept Lens Mount Adapter
Prime Day
Prime Day
Beschoi Canon FD FL Lens to Canon EOS EF Mount Camera Body with Glass K&F Concept Lens Mount Adapter
$32.99
Related Faq
Q
can take a few photos
A
It depends on many factors, the mode of your lens autofocus/whether you use flash/whether you shut down after taking the picture or wait for the camera to automatically sleep 
Q
Can the aperture be controlled on my Canon EF 35mm f/1.4L II USM Lens?
A
KF06.466 is an automatic adapter,achieving autofocus, aperture control, EXIF ​​information transmission, lens anti-shake and other functions. 
Q
Does the autofocus work with the Nikon lens on the Canon camera?
A
This adapter is non-electronic and so will not enable electronic communication between lens and camera, so no autofocus. 
Q
Trying to use with my canon 50 mm 1.8 but it won’t focus? Does this not work with this lens?
A
yeah, this is just a basic adapter... you need to get a metabones adapter if you want the lens to "talk" to the camera ($650).... that's the whole point of the metabones 
Q
Too loose/there is gap between lens and adapter ring
A
  1. If there is ever any more than a slight amount of rotational play, you may want to try tightening the lens mount adapter so it will hold the lens tighter to the mount. There are 3 flanges in the middle of the adapter (what the lens locks onto) that are split open slightly, this gap is what gives the tension that holds the lens tight to the body. Over time and with use these gaps decrease in size, no longer pulling the lens tight to the adapter, which allows the lens to move inside the mount more than it should.
  2. To tighten the fit, get a slim metal object (a #1.5 or #2.0 small flat eyeglass screwdriver is ideal) and insert it into the slit to open it up just a little bit (see images below, make sure to do it to all 3 evenly). The more you open the gap, the tighter the lens will be to the adapter; too much and the lens will have a hard time mounting so make sure to do it just a little bit at a time to all 3 flanges evenly, it doesn’t take much at all to get a tight fit.Note: please do not use too much strength, or the shrapnel will be damaged.
 
Related Video
K&F Concept® Lens Mount Adapter for Canon EOS EF mount Lens to GH4
K&F M10101 M42 Lenses to Sony E Lens Mount Adapter
K&F M10111 M42 Lenses to Fuji X Lens Mount Adapter
Related Blog

Kipon Lens Mount Adapter Kipon Adapter Canon To Canon Kipon Autofocus Lens Adapters Kipon Lens Adapter Fuji Lens Adapter With Autofocus Nikon Lens Kipon Adapter Kipon Lens L Mount Kipon Adapter Nikon Z Kipon Nikon Z Autofocus Adapter Nikon Autofocus Adapter From Kipon

Filter For Fuji 27mm Lens Sony E Mount Meaning 50mm Canon Screw Mount Lens Canon Eos R5 Adapter 12-24mm Lens Ef Mount Used Sony 18-105mm Oss E Mount Lens Nikon 2 T Adapter Nikon To Eos Mount Commlite Adapter Sony A7iii Best Sharp Primes Sony E-mount