This adapter is non-electronic and so will not enable electronic communication between lens and camera, so no autofocus. 

First, K&F Concept ND2-ND400 lens filter allows changing shutter speed based on the effect you want with the best sensibility and the same aperture. Second, K&F Concept ND2-ND400 lens filter allows creating a blurred background with a large aperture while the shutter speed remains the same. Third, K&F Concept ND2-ND400 lens filter is designed to prevent overexposure and maintain image purity and quality at the same time. *Like a zoom lens, the variable nd filters are suitable for multiple shooting situations. If you're looking for perfect image quality, a fixed ND filter is recommended. 

K&F have a list of which adapter will work for each lens to camera combination they support 

This issue could be improved according to following suggestions:

1. Q1: Camera shutter does not release when lens is attached
   A：The lens is fully manual and does not have electrical contacts. Please switch your camera to "M" (manual) mode
2. Q2: Images are too dark
   A：Lower the f-stop on the lens, and/or lower shutter speed, and/or raise ISO settings on camera
3. Q3: Images are too bright
   A：Raise the f-stop on the lens, and/or raise shutter speed, and/or raise ISO settings on camera
4. Q4: Images are not coming out in focus
   A：a) Adjust the focusing distance on the lens to the correct distance.
   b) In certain photographic situations, you may find it easier to focus at f/5.6-8 rather than f/3.5

 

If your camera indicated "lens is not properly installed", please modify the camera menu settings. Usually called the "release the shutter the lens is not installed", you can modify the settings to allow. Specifically refer to the camera manual.Following are some examples:

1. MFT（M4/3 mount camera）'Lens Not Found' - Warning Message Appears
   For Panasonic Lumix:
   The camera needs to be set to function without a MFT-Mount lens attached. You can do this by changing the following camera setting:
   'Menu' -> 'Custom Menu 5' -> 'Shoot W/O Lens' -> 'On'
   (Exact naming and location of this option may change depending on camera model)
   
2. Fujifilm X mount camera, The camera needs to be set to function without a GFX-Mount lens attached. You can do this by changing the following camera setting:
   'MENU' -> 'SETUP' -> 'BUTTON/DIAL SETTING' -> 'SHOOT WITHOUT LENS' -> 'ON' (Exact naming and location of this option may change depending on camera model) Choose ON to enable the shutter release when no lens is attached.
   
3. Sony E mount camera, 'No Lens Attached' - Warning Message Appears
   The camera needs to be set to function without a E-Mount lens attached. You can do this by changing the following camera setting:'Menu' -> 'Setup' -> 'Release w/o Lens' -> 'Enable'
   (Exact naming and location of this option may change depending on camera model)
   
4. Nikon 1-Series mirrorless camera , 'Check lens. Pictures can only be taken when a lens is attached' - Warning Message Appears
   With a Nikon 1-Series camera (such as the J2), you will need to make sure the camera is in 'Manual' exposure or shooting mode and the focus selection is also set to manual. When in any other mode the camera tries to take control of the lens which is not possible as the adapter does not have any contact with the camera circuitry, so you get the lens check warning as the camera does not think there is a lens attached.
   
5. 'EOS M mirrorless camera ,'No Lens Attached' - Warning Message Appears
   The camera needs to be set to function without a EF-M Mount lens attached. You can do this by changing the following camera setting:
   'Menu' -> 'Custom Menu' -> 'Custom Function 7' -> Select 'Release shutter w/o lens'
   (Exact naming and location of this option may change depending on camera model)
   
6. Konica Minolta:
   For Konica Minolta and "No Lens Attached"
   Custom Menu 3
   First item "Shutter Lock"
   Set it to "Off: no lens"
   (Depending on camera model "Shutter Lock" May be in different menu location)
   
7. 'Samsung NX 'No lens.' - Warning Message Appears
   The adapter is designed to trigger a sensor inside the camera body itself so no setting needs to be changed. If the error message is coming up with one of our adapters attached, then it is possible that the adapter is not hitting that sensor the way that it should. Usually rotating the adapter slightly in the mount, or un-mounting and remounting the adapter clears the problem with no further action needed. If that doesn't solve the problem, then the best course of action would be to swap out the adapter you have with a replacement.