Works flawlessly - using a Minolta MD to Sony Nex adapter.Fit is perfect, and the adapter comes off the body with ease - same with removing lens from adapter.This adapter has allowed me to use all of my old MD/MC lenses instead of letting them sit around for the occasion when I haul out my X-700.

I love this film. Brings me back to yesteryear. I use it in my Leica Sofort. With the right light you can get really clear pictures.

Part 1 - Minolta MD to Sony NEX adapterTechnically, it slightly overshoots infinity but the issue is easily corrected by dialing back the focus ring just a tad --- Not exact but clearly better than not-at-all.Although very light due to extensive aluminum usage, the build quality and fit-and-finish of the adapter is superb. Connections on the lens and camera mount sides are tight and precise --- absolutely, zero slop. The top of the lens release button is flattened making the lens removal process very easy and comfortable.Other notes:- There are no electrical connections so focus and zoom must be done manually on the lens itself- When mounting the lens, turn the adapter clockwise till you hear a "click"- Tested with a Minolta 85mm f/1.7 Rokkor-X MD lens mounted to a Sony a6000 camera-----------------------Part 2 - Nikon Ai to Sony NEX adapterEdit: Based on my positive experience with the Minolta MD adapter, I also purchased the Nikon Ai adapter later.As with the Minolta MD adapter, the Nikon Ai version focuses beyond infinity a tiny bit. Fortunately, the same solution applies - dial back the focus ring and the horizon will become crystal clear. The build quality is impeccable and the finish is smooth and clean of burrs or machine marks. Connections on both sides are taut and precise with zero play.Additional notes for Nikon Ai adapter:- No electrical connections present so focus and zoom must be done manually on the lens.- Unlike the Minolta MD adapter, mounting the lens for Nikon adapter requires a counter-clockwise turn until you hear the "click" of the locking mechanism- Tested with a Nikon Micro Nikkor 55m f/2.8 Ai-S MF lens mounted to a Sony a6000 camera

Bought this flash to go with my Leica M10 on the odd occasions I need it. Wanted to get a TTL flash but the Leica ones are too big and expensive.Although essentially a manual flash that will work with anything, there is an auto mode that uses an inbuilt light sensor. This works reasonably well. For the cost and size it is definitely worth the purchase.

Say what you will about the Leica price premium but this is an amazing little monocular. I've been using it for about 6 months now and don't know how I ever lived without it. I'm a photographer and this fits nicely in my camera bag, to be used for spotting animals and people to approach and photograph. I also take it with me on extended mountain treks, where it is incredibly useful. The close-up lens is nice to have, but I find myself using it only infrequently, mostly because the case, where it is stored, is so bulky I tend to leave it home. It gets 4 stars instead of 5 due to the bulkiness of the case, which doesn't fit the lanyard, and factoring in price/value.But why the Leica? Because of the clarity and brightness of the image and the durability and build of the product. It's survived 4 foot falls onto dirt without damage. It's been inundated with rain and snow. I've let everybody and their uncle use the thing and it's still like new. The initial stiffness in the focus ring has loosened up. It's possible to shoot through the monocular using my Sony RX100M3 camera, or any smaller point-and-shoot. Just put the zoom on full and focus on infinity, then place the monocular over the lens. The results aren't spectacular, but it'll do as a long telephoto in a pinch.I look forward to decades of use of this investment, and eventually I'll pass it on to one of my kids.

I purchased a Canon FD to Leica M adapter in order to get some more use out of my 17mm Canon lens. I’m pretty impressed with it so far. It seems considerably better quality than the cheap imported adapters, and not as expensive as a Novoflex. The lens hooks up solid and it feels solid on the camera body. I will most likely try some of their other adapters as necessary.

I was looking for a hi-res webcam to use with OBS. I do Youtubes on electronics and need the ability to zoom into fine pitch circuit boards using an overhead boom. Image quality is great. The 5-50 mm zoom lens is decent, it does the job. A little fiddly, but for the price....I am trying to up the lens quality. I bought an adapter that allows me to use my lovely old Minolta MD manual (film) lenses with it. It needs a Cmount to Minolta MD adapter (~$20) plus about 6-8mm of Cmount extender tubes. If you do this, keep in mind that because of the smaller sensor, low mm (25-35mm) lenses are needed. I haven't yet found the perfect low mm zoom lens for it. Maybe a 28-70mm Minolta MD lens. There are many on Ebay. Have fun!Update. Using 35mm camera lenses works, but they are too close for this small sensor camera. Even my 28mm lens has a very small field of view unless you put the camera several feet away. So unless you want real close ups....

The product arrived very quickly. It feels heavy and of good quality. I have not been able to attach it to my Sony Alpha7ii yet, but it works well with the four legacy Minolta MD or MC lenses I have. Here's an image of a MD TELE ROKKOR-X 200mm 1:4 lens with the adapter in place. It fits VERY snuggly, and locks in place with a solid click. NO looseness whatsoever. The silver push pin on the adepter is a bit loose but does its job. Just line the adapter's red dot up with the red dot on the lens body and turn clockwise until it stops, (it will still feel a little loose at that point), then push a little harder for another eighth of a turn until you hear the adapter "click" and lock to the lens. The red dots on the adapter and on the lens body will be about an inch and a quarter from each other once the adapter is fully locked to the lens. If the adapter fits as snugly to the camera body as it does to the lens, it is going to be a very solid feeling experience. Note image #3 where the point of the pencil shows the adapter's pin locking in to a notch in the lens's stock Minolta mount.