Hooked the adapter up to my Raspberry Pi and an older monitor and it worked with no adjustment necessary.

I really like this phone holder adapter for tripod. It's so much better that the adapters that have come on other tripods. I like the screw adjustability instead of a spring loaded holder. The spring liaded one I just had broke did to the tension of the springs.

Great height with 3 adjustment options available. It holds my laptop securely; very stable. It was easy to assemble. Solid black color that has held up for the short time I've had it. Height allows for items to be stored or placed underneath. Regarding aesthetics, there is some lack of uniformity, quality control in the legs where the adjustment notches and holes are facing...there is no way to have them all facing inward, they all face different directions...some are turned out facing me, so instead of the solid black leg you see the holes and the silver knob that adjusts height sticking out. Essentially, when you screw them on, they are not uniformly set to screw on to the same position. Other than that, the item has great functionality.

Faultless!The Neutral Density (ND) filters are wonderful and they do stop the light hitting the sensors no problem.The other filters are perfect too but normally you don't need a UV filter on a digital camera but I use it just to protect the lens.The other filters will them screw onto the UV filter but don't screw too tight.The polarised filter does have a revolving rim "GASP" and is ideal. I didn't realise it had a revolving rim until I actually used it and screwed it on.I can tell you now that anyone giving these filters and less than 5 stars are bonkers because these are superb.The wallets they came in are and look really well made as does the filters. The rubber lens shade is really good too and will push flat to allow it to fit in your case. I have no use for the plastic screw on shade so that will be used for something when I have my thinking head on.The lens cap is a good one and comes with a lanyard but I will not use the lanyard as I do not want it dangling from the camera.I would recommend these to anyone who want cheap but quality lenses.

I mostly use this clamp with my GoPro Hero 8, or any equipment with 1/4 screw adapter.It provides so many mounting options and quite sturdy! Very well made, all metal!

Wide range of adjustment for different size handlebars. In my case I had to use the longer screw, (it comes with two) and most importantly it holds my Moto Z3 very securely.”Update: I bought another one to give to a friend to use on her new bike.

I like it because it has a screw adjustment for tightening down on the phone. It is made well and looks like it will last.

I like the fact that Celestron goes the extra mile to ensure their product arrives in one piece, these bino's were well packaged. I did a fair amount of review reading before purchasing these as I was moving up from an older pair of Tasco Zip fully coated10x50 and I wanted to make sure I was going to be happy with the purchase as I hate sending anything back. Well, as luck would have it, these bino's were out of collimation and that was a definite bummer, but a quick check on the net produced several vids on what to do to fix the problem. Now I was a little hesitant to pry up the rubber to get at the adjustment screws but the rubber coating came up simply enough and gave full access to the screw that I need to adjust. I only had to adjust the screw a 1/4 turn to get the images back into alignment, if you turn the screw the wrong way and look through the bino's it will be very evident it needs to be turned in the opposite direction.In my case the screw that needed adjustment was just above the "M" in the name SkyMaster on the left side of the bino under the rubber, it is a common"flathead" screw, you will need a small precision screwdriver to fit and it may possibly help you to use a set of vice-grips on the screwdriver to get a good enough grip to be able to turn the screw.Once I had the bino's back in collimation the view was excellent and a nice improvement over my 10x50's. Having the 70mm lenses helps bring in additional light for viewing early morn or later in the evening. As you can imagine they are a bit heavier but not bad for holding for short periods.