M Mount Lens Guide
Related Faq
Q
How to determine if the camera installation location is OK?
A
The main purpose is to determine the wifi signal strength, open the APP and there is an "installation guide" to detect the wifi signal strength to ensure that the location is suitable for installing the camera. It is recommended that the network signal reach more than 80%. 
Q
Where can I get an affordable guide ball for this camera?
A
Thank you for your interest in our two lens endoscope camera, we do not currently supply a guide ball. You can refer to the 8mm diameter of the endoscope lens to purchase the guide ball. 
Q
I store my artwork and phots in my phone. Can I use this projector with my phone, to enlarge my artwork on a canvas.
A
The "quick guide" that comes with this device has guidance on how to do this for ios and android. I also received a "complimentary" canvas display screen with my unit, large. 
Q
Will this work on my sony a6000 and tokina minolta 100-300mm macro zoom?
A
Yes 
Q
Too loose/there is gap between lens and adapter ring
A
  1. If there is ever any more than a slight amount of rotational play, you may want to try tightening the lens mount adapter so it will hold the lens tighter to the mount. There are 3 flanges in the middle of the adapter (what the lens locks onto) that are split open slightly, this gap is what gives the tension that holds the lens tight to the body. Over time and with use these gaps decrease in size, no longer pulling the lens tight to the adapter, which allows the lens to move inside the mount more than it should.
  2. To tighten the fit, get a slim metal object (a #1.5 or #2.0 small flat eyeglass screwdriver is ideal) and insert it into the slit to open it up just a little bit (see images below, make sure to do it to all 3 evenly). The more you open the gap, the tighter the lens will be to the adapter; too much and the lens will have a hard time mounting so make sure to do it just a little bit at a time to all 3 flanges evenly, it doesn’t take much at all to get a tight fit.Note: please do not use too much strength, or the shrapnel will be damaged.
 
Related Video
K&F Concept® Lens Mount Adapter for Canon EOS EF mount Lens to GH4
K&F M10101 M42 Lenses to Sony E Lens Mount Adapter
K&F M10111 M42 Lenses to Fuji X Lens Mount Adapter
Related Blog

E Mount Lens Guide Sony E-mount Lens Guide Leica M Mount Lens Guide Lens Mount Identification Guide Guide To Canon Lens Mounts Anamorphic Lens Adapter Elements Sony Lens Adapter Guide Fuji X Mount Lens Guide Guide To Lens Mounts Nikon Z Adapter Guide

Variable Lens Filter Peter Mckinnon Canon G1x 58mm Adapter Sony A7iii Adapted Lens Speed E-mount 28-135mm F4 Cine Servo Zoom Lens Fotodiox Nikon To M43 Adapter Nikon Focus Motor Adapter Nikon 70-200 F2.8 S Mount Sony A Mount Nikon Speedbooster For Pentax K Mount Sony Ef Mount Cameras