This clamp is AWESOME. It is so versatile. You can mount to poles, doors, edges of things, and you can use it to mount a GoPro camera to just about anywhere with the optional "Sametop Replacement Tripod Mount Adapterm https://www.amazon.com/Sametop-Replacement-Adapter-Compatible-Session/dp/B0126KXDN2/ref=sr_1_1?ie=UTF8&qid=1536940665&sr=8-1&keywords=Sametop+Replacement+Tripod+Mount+Adapter&dpID=51ak1cLKv6L&preST=_SY300_QL70_&dpSrc=srch

I love macro photography and recently brought a regular speedlight (albeit a compact one) so that I could take it around with me; a bit of a pain, if I'm honest, with having the diffuser on it and trying to get the best light. Then I noticed this one a month after, and it was even cheaper, so I thought I would try it.I actually have 2 macro lenses over the years, a Nikon F mount and a Nikon Z mount, and there is an important thing you need to do with the Z mount lens; do not mount the flash to the lens part, which moves in and out, attach it with a larger adapter to the outer case. This is because it will put undue pressure on the lens and can result in lens motor failure. I did a lot of research on that, so I thought you should know.Loved the fact that it came with so many adapters, as I was a bit worried I was going to have to find some to fit my lenses.The light is beautifully even that comes out of it and really makes your picture pop, and the cable to the main unit is soft and flexible and doesn't pull against front. Very simple controls on the back to adjust the power, and so far, I've only needed the lowest setting for macro work, although I'm sure the higher setting will come in useful for portraits (not tried that yet).

I use it with my Nikon D750 and Fuji T-X10 and it does a great job.

I use this to travel with. Great little tripod to use with my go pro (i use the go pro tripod mount adapter) for stationary shots

I love this mount. It is not compatible with the Nikon FTZ adapter unless you move it from the body to the adapter or buy another mount just for the adapter. I’ve hike a couple mountains and bustled through crowds without fail using this mount.

Part 1 - Minolta MD to Sony NEX adapterTechnically, it slightly overshoots infinity but the issue is easily corrected by dialing back the focus ring just a tad --- Not exact but clearly better than not-at-all.Although very light due to extensive aluminum usage, the build quality and fit-and-finish of the adapter is superb. Connections on the lens and camera mount sides are tight and precise --- absolutely, zero slop. The top of the lens release button is flattened making the lens removal process very easy and comfortable.Other notes:- There are no electrical connections so focus and zoom must be done manually on the lens itself- When mounting the lens, turn the adapter clockwise till you hear a "click"- Tested with a Minolta 85mm f/1.7 Rokkor-X MD lens mounted to a Sony a6000 camera-----------------------Part 2 - Nikon Ai to Sony NEX adapterEdit: Based on my positive experience with the Minolta MD adapter, I also purchased the Nikon Ai adapter later.As with the Minolta MD adapter, the Nikon Ai version focuses beyond infinity a tiny bit. Fortunately, the same solution applies - dial back the focus ring and the horizon will become crystal clear. The build quality is impeccable and the finish is smooth and clean of burrs or machine marks. Connections on both sides are taut and precise with zero play.Additional notes for Nikon Ai adapter:- No electrical connections present so focus and zoom must be done manually on the lens.- Unlike the Minolta MD adapter, mounting the lens for Nikon adapter requires a counter-clockwise turn until you hear the "click" of the locking mechanism- Tested with a Nikon Micro Nikkor 55m f/2.8 Ai-S MF lens mounted to a Sony a6000 camera

I like getting this fuji film instead of getting the individual ones.

Fits my Fuji X-H2 perfectly, as you can see in the pictures. It's easy to mount on the X-H2, via the tripod mount, using the magnetic tool that slides into it's own storage slot on the bottom. That same tool you use to attach the additional hold down on the left side of the camera, so in the end, the fit feels solid on the camera and ready for rig attachments. Battery is accessible on the bottom, and there is a Arca-Swiss rail on the bottom and a cold shoe on the left hand side of the top of the camera. Fits perfectly!