Dear Customer, so sorry to tell you that this adapter won't allow your nikon 1 s1 lenses to mount to my canon t2i. 

Unfortunately this is for adapting lenses to Olympus' modern digital Micro 4/3 cameras. It won't work with the Pen FT or similar half-frame film cameras, and you most likely won't find anyone making adapters for these. 

FD-EOS fit for Canon FD mount lens and canon EF mount camera body. canon 60d is EF mount, so the adapter ring can work with your camera, but you need to check your lens mount. could you pls let us know your lens specific model? service(AT)kentfaith(DO NOT)com, Please note: It is not same between Canon FD mount and EF mount, this adapter ring is only for Canon FD mount lens, please contact us if you want to purchase for Canon EF mount lens. 

Yes. Works great. I have used it with many old and new Nikon lenses with my GH5 camera. This adapter and my Nikon 10.5mm fisheye is one of my favorite combos. 

1. As Canon’s EOS lenses are electronically controlled，most Canon EF mount lenses do not feature a manual aperture ring，so when used on our EOS-M4/3, which is a full manual operation adapter ring, the aperture could not be transferred to the camera, it will stop down to its smallest f/stop by default.
2. Some buyer mentioned could not adjust the aperture, actually this is because your lens does not have the aperture control function, If your lens does not have a manual aperture control ring, it will stop down to its smallest f/stop by default
3. You could set your aperture via this way, but we do not suggest to use this way: You can control the f-stop by putting the lens on an EOS body, stop it down using the DOF preview button, and while holding the button down taking the lens off the camera. You can then transfer the lens to the M4/3 camera, and it will retain the f-stop.