Minolta 28mm M Mount Lens
Related Reviews
Evelyn Hall
5
Perfect for Fuji X or other Mirrorless w/prime
I was looking for a very snug portable case so I could put the 28mm pancake lens on my Fuji X-E1 and just toss it into my purse. Effectively turning it into a very very good ultra-portable. This fit the bill perfectly and I imagine it would work for most small mirrorless cameras and while I am using a pancake, there's definitely room for a lense up to a few inches in size.
03/01/2023
STLroadwarrior STLroadwarrior
5
Adapter fits perfectly on my Sony a6000
Adapter fits perfectly on my Sony a6000. Looks and feels very well made. For a low investMent it allows you to use your legacy Minolta Rokkor lens. You can expand your lens collection inexplicably with those legacy SLR lens. I currently have a Minolta Rokkor MC 50mm and a Vivitar 85-205mm zoom; both fit perfectly to the adapter and the adapter to camera base. You just have go back to your roots and manually adjust all settings. Focusing was easy. I did notice a lag in the viewfinder when adjusting the f stop using the Vivitar zoom, but not difficult to get true view before shooting pics. Rokkor 50mm works great.Just took a couple early morning pics with my Minolta 50mm. 1/320, ISO 3200, and f 1.7 (manual settings) Pic as shot and I didn’t do any editing/corrections. Enjoy!
30/11/2022
Joyce
5
good item
this was the second choice, but works great. the other product didn't fit the Minolta lens. This one is perfect. 100% recommendation
21/11/2022
BOB2436
4
Four Stars
What I expected, allows me to use the older Minolta lens.
03/11/2022
Genia
5
Great little lens cap
Bought this to replace the missing lens cap on my girlfriend's Minolta 50mm 1.7!Way better than the original Minolta lens caps!
05/04/2022
Mike A. Mike A.
5
Exceptional adapters that focus to infinity with m
Part 1 - Minolta MD to Sony NEX adapterTechnically, it slightly overshoots infinity but the issue is easily corrected by dialing back the focus ring just a tad --- Not exact but clearly better than not-at-all.Although very light due to extensive aluminum usage, the build quality and fit-and-finish of the adapter is superb. Connections on the lens and camera mount sides are tight and precise --- absolutely, zero slop. The top of the lens release button is flattened making the lens removal process very easy and comfortable.Other notes:- There are no electrical connections so focus and zoom must be done manually on the lens itself- When mounting the lens, turn the adapter clockwise till you hear a "click"- Tested with a Minolta 85mm f/1.7 Rokkor-X MD lens mounted to a Sony a6000 camera-----------------------Part 2 - Nikon Ai to Sony NEX adapterEdit: Based on my positive experience with the Minolta MD adapter, I also purchased the Nikon Ai adapter later.As with the Minolta MD adapter, the Nikon Ai version focuses beyond infinity a tiny bit. Fortunately, the same solution applies - dial back the focus ring and the horizon will become crystal clear. The build quality is impeccable and the finish is smooth and clean of burrs or machine marks. Connections on both sides are taut and precise with zero play.Additional notes for Nikon Ai adapter:- No electrical connections present so focus and zoom must be done manually on the lens.- Unlike the Minolta MD adapter, mounting the lens for Nikon adapter requires a counter-clockwise turn until you hear the "click" of the locking mechanism- Tested with a Nikon Micro Nikkor 55m f/2.8 Ai-S MF lens mounted to a Sony a6000 camera
31/03/2022
Patrick
5
Great filter for the money
I bought this filter for my Tamron 17-28mm e-mount lens and love it. I haven't noticed any major color distortion and the sharpness doesn't seem to be affected at all either. The low profile seems to negate most vignetting you may encounter, but it does show up (unsurprisingly) if you stack this with another filter like a CPL. The gold ring is a nice touch too. I would absolutely buy these again as you get great results for the money.
30/10/2021
J. Wolters
5
Better than expected with APS-C DSLR
When I purchased this lens for my Canon Rebel xsi, I knew it would give me a cropped image equivalent to 27-64mm. I already have a 28-70 lens, that becomes about 44-115 on my Rebel. I wanted to get back the 28mm (semi-wide) view but did not want a lens that would not work on a full-frame camera as I expect to upgrade at some point. So I opted for this lens. What I didn't realize, or had forgotten, was that this lens has a close focus of 11 inches. Which means that even though on the wide end it is equivalent to 28mm, it still is capable of producing an image with a much wider perspective than a standard 28mm on a full-frame. The distortion of angles at the 17mm setting with objects up close is still significant enough to get some really unique shots. F/4 doesn't cause me any problems because when I'm indoors I just set ISO to automatic and it really doesn't impact my shooting at all. Outdoors, who needs f/2.8 with a wide angle anyway.I haven't seen any reviews that have mentioned how the close focus ability impacts the perception of wide angle. Anyway, I'm very pleased with the purchase. Only thing that could be better would be an all-metal body on the lens. It feels a bit less luxurious due to the plastic barrel.Just my 2 cents. **Also** Sounds crazy...but true...somehow my copy of this lens is close-focusing at 5 or 6 inches rather than 11. Not sure if this is normal on an APS-C camera or not, but I'm a little mystified as to how this is happening!
06/09/2021
Related Faq
Q
What is the diameter of tube leg?
A
Diameter of the tube leg is from 19mm to 28mm. 
Q
I have a Minolta lens, can i use this adapter?
A
Could you please update us your full Minolta lens model ?as Minolta has MD MC and AF mount, K&F Concept MD-M4/3 is suitable for: Lens: Minolta MD MC Mount lens(not for Minolta AF mount: KF06.157) Camera: Micro 4/3 (MFT) mount mirrorless camera like Olympus PEN, OM-D series, Panasonic Lumix DMC-G1, G2, G3, G10, GX1, GH1, GH2, GF1, GF2, GF3, GF5, GH4, Panasonic AG-AF100 Mirrorless Digital Cameras, Black Magic Pocket Cinema Camera (BMPCC) 
Q
I have a Ann older canon fd 50mm 1.8 and a Sony a6000. Is this meant for that?
A
Yes the FD-NEX adapter is what you need. I also have a a6000 and a Canon FD 50mm , 28mm, and a 300mm and they all work well with this adapter. 
Q
I currently own 3 a-mount lense (from a sony a230) just bought a sony a5000, which is an emount. Will this adapter fit my old lenses to my new camera?
A
No, this adapter is for the older manual focus Minolta Rokkor MC and MD lenses. If you want to autofocus and aperture control you will need the Sony LA-EA4. (the lower cost Sony LA-EA3 will electronically connect A mount lenses but you will have to manually focus.) 
Q
Will this work in my camera Sony Alpha a3500?? Diameter 55mm.
A
it will work with a3000 and a3500. use this adapter with minolta md or minolta sr lenses 
Related Video
K&F Concept® Lens Mount Adapter for Canon EOS EF mount Lens to GH4
UNBOXING k&f concept lens adapter + Minolta X 700!
K&F M10111 M42 Lenses to Fuji X Lens Mount Adapter
Related Blog

28mm M Mount Lens 28mm E Mount Lens 28mm L Mount Lens Pentax K Mount 28mm Lens Minolta 28mm F2.8 M Mount Minolta 28mm M Mount 28mm K Mount Lens Nikon D810 Wireless Mobile Adapter E Mount 28mm F 2 Lens Sigma 28mm F 2.8 Minolta Md-mount

Uv Filter Vs No Uv Filter Lens Canon M50 Adapter Ef Sony 300mm 2.8 E Mount Canon 22 M Mount Olympus E510 Lens Adapter T-mount Lens Adapter For Boyer 650 100mm 5 Mm Ef Mount Lens Hasselblad To Nikon Z Adapter Pentax K Adapter For Nikon Pentax To L Mount