Could you please update us your full Minolta lens model ?as Minolta has MD MC and AF mount, K&F Concept MD-M4/3 is suitable for: Lens: Minolta MD MC Mount lens(not for Minolta AF mount: KF06.157) Camera: Micro 4/3 (MFT) mount mirrorless camera like Olympus PEN, OM-D series, Panasonic Lumix DMC-G1, G2, G3, G10, GX1, GH1, GH2, GF1, GF2, GF3, GF5, GH4, Panasonic AG-AF100 Mirrorless Digital Cameras, Black Magic Pocket Cinema Camera (BMPCC) 

Yes 

1. If there is ever any more than a slight amount of rotational play, you may want to try tightening the lens mount adapter so it will hold the lens tighter to the mount. There are 3 flanges in the middle of the adapter (what the lens locks onto) that are split open slightly, this gap is what gives the tension that holds the lens tight to the body. Over time and with use these gaps decrease in size, no longer pulling the lens tight to the adapter, which allows the lens to move inside the mount more than it should.
2. To tighten the fit, get a slim metal object (a #1.5 or #2.0 small flat eyeglass screwdriver is ideal) and insert it into the slit to open it up just a little bit (see images below, make sure to do it to all 3 evenly). The more you open the gap, the tighter the lens will be to the adapter; too much and the lens will have a hard time mounting so make sure to do it just a little bit at a time to all 3 flanges evenly, it doesn’t take much at all to get a tight fit.Note: please do not use too much strength, or the shrapnel will be damaged.

 

No, this adapter is for the older manual focus Minolta Rokkor MC and MD lenses. If you want to autofocus and aperture control you will need the Sony LA-EA4. (the lower cost Sony LA-EA3 will electronically connect A mount lenses but you will have to manually focus.) 

it will work with a3000 and a3500. use this adapter with minolta md or minolta sr lenses