Miranda Lens Mount To M42 Adapter
Related Faq
Q
Which M42 adapter should be used on your lens?
A

Please note: our M42 adapter ring could not be suitable for Pentax Takumar Super Takumar Carl Zeiss M42 series(aperture pin does not fully depress, small tabs sticking out), as ours depresses the aperture pin all the way down

 
Q
Too loose/there is gap between lens and adapter ring
A
  1. If there is ever any more than a slight amount of rotational play, you may want to try tightening the lens mount adapter so it will hold the lens tighter to the mount. There are 3 flanges in the middle of the adapter (what the lens locks onto) that are split open slightly, this gap is what gives the tension that holds the lens tight to the body. Over time and with use these gaps decrease in size, no longer pulling the lens tight to the adapter, which allows the lens to move inside the mount more than it should.
  2. To tighten the fit, get a slim metal object (a #1.5 or #2.0 small flat eyeglass screwdriver is ideal) and insert it into the slit to open it up just a little bit (see images below, make sure to do it to all 3 evenly). The more you open the gap, the tighter the lens will be to the adapter; too much and the lens will have a hard time mounting so make sure to do it just a little bit at a time to all 3 flanges evenly, it doesn’t take much at all to get a tight fit.Note: please do not use too much strength, or the shrapnel will be damaged.
 
Q
Will this adapter allow me to mount a fujinon m42 55mm 1.8 and a sigma-z m42 135mm 2.8 to a sony a6000?
A
HI your fujinon m42 55mm 1.8 and a sigma-z m42 135mm 2.8 are M42 mount, the item can fit your camera and lens 
Q
Does this adapter allow for canon fd lenses to focus to infinity on sony e-mount mirrorless cameras?
A
yes, i had no problems with infinity focus with this adapter. the only FD mount lens i use anymore with my sony is a vivitar 20mm, and i pretty much only shoot infinity focus with it. 
Q
is this mount adapter work with panasonic GX-7 body & nikkor dx 18-200 lens.
A
The adapter will mount the lens and you will be able to use it manually. However, my copy of the adapter does not allow the lens to be fully mounted all the way until it clicks into place. It doesn't quite make it, but it's still very solidly mounted. Also, the manual aperture linkage doesn't work properly (on my copy, at least) so exposure is controlled only by shutter speed and/or ISO. You will be able to manually focus and zoom the lens but no VR, of course. It will be a frustrating experience. Instead, get a 14-140 Panasonic zoom if you can afford it! 
Related Video
K&F M10101 M42 Lenses to Sony E Lens Mount Adapter
K&F M10111 M42 Lenses to Fuji X Lens Mount Adapter
M42 Lenses to Fuji X Mount Camera Copper Adapter
Related Blog

Miranda Camera Lens Mount Miranda Lens Mount Adapter Miranda Lens To Eos Adapter Auto Miranda Lens Mount Miranda Sensorex 2 Lens Mount Miranda Sensorex Ii Lens Mount Miranda Sensorex Lens Mount Miranda To Nikon Adapter Nikon Adapter Cord For Israel Voltage Miranda Mount To Sony E Mount

Anamorohic Lens With Bokeh Filter 7artisans Ef-se Lens Adapter F Mount Cine Lens Canon Eos M100 Lens Adapter Ccd Canon Lens Adapter Vivitar To Canon Eos Adapter Best Lens For Full Frame Mirrorless F-mount Macro Zoom Lens C-mount Nikon D600 Lens Mount Type Helios 44-2 58mm Nikon Adapter