I love this mount. It is not compatible with the Nikon FTZ adapter unless you move it from the body to the adapter or buy another mount just for the adapter. I’ve hike a couple mountains and bustled through crowds without fail using this mount.

According to the "What's in the Box" the BOOM3 comes with a cable and power adapter. My speaker arrived minus a power adapter so had I not ordered the Power Up accessory I would not have a method of charging it. I called Amazon and was told a charger is not included despite what it says on the website. The carry case has a place to store the adapter and the cable which would be quite convenient for packing. My carry case is useless as I put the Power Up charger and cable in a baggy and no point putting the speaker in the case as it just takes up more space.

Part 1 - Minolta MD to Sony NEX adapterTechnically, it slightly overshoots infinity but the issue is easily corrected by dialing back the focus ring just a tad --- Not exact but clearly better than not-at-all.Although very light due to extensive aluminum usage, the build quality and fit-and-finish of the adapter is superb. Connections on the lens and camera mount sides are tight and precise --- absolutely, zero slop. The top of the lens release button is flattened making the lens removal process very easy and comfortable.Other notes:- There are no electrical connections so focus and zoom must be done manually on the lens itself- When mounting the lens, turn the adapter clockwise till you hear a "click"- Tested with a Minolta 85mm f/1.7 Rokkor-X MD lens mounted to a Sony a6000 camera-----------------------Part 2 - Nikon Ai to Sony NEX adapterEdit: Based on my positive experience with the Minolta MD adapter, I also purchased the Nikon Ai adapter later.As with the Minolta MD adapter, the Nikon Ai version focuses beyond infinity a tiny bit. Fortunately, the same solution applies - dial back the focus ring and the horizon will become crystal clear. The build quality is impeccable and the finish is smooth and clean of burrs or machine marks. Connections on both sides are taut and precise with zero play.Additional notes for Nikon Ai adapter:- No electrical connections present so focus and zoom must be done manually on the lens.- Unlike the Minolta MD adapter, mounting the lens for Nikon adapter requires a counter-clockwise turn until you hear the "click" of the locking mechanism- Tested with a Nikon Micro Nikkor 55m f/2.8 Ai-S MF lens mounted to a Sony a6000 camera

Like most everything - but the zoom lens is not very powerful compared to, say, a small Nikon.

L'espace permet le rangement de mon Nikon D7200+grip+sigma 17-70 zoom, malgré espace d'accès serré avec grip. J'y inclus mon zoom Nikon 70-300 et Nikon DX 35 f1.8 en ayant ajusté les séparateurs internes. Petit compartiment supérieur suffisant pour batteries, filtres, ou porte monnaies etc...Grosseur du sac non encombrante et fonctionnelle. Pour le prix, répond très bien à mes attentes casser la banque ! Pour la durabilité, l'avenir le dira, mais aucun regret pour mes besoins actuels...Recommandé !

Belcheri USB 3.2 Gen 1 to SATA or IDE Adapter, External Hard Drive Adapter for 2.5 or 3.5 inch SATA or IDE HDD SSD, IDE and SATA Converter with 12V Power Adapter and Type C PortThe driver adapter comes handsomely packaged in a retail box with pictures of the product outside and manufacturers' code numbers. Inside the box, you'll find the adapter itself, a USBC cable that has both ends to be USBC and another cable that is USBC on one end and USBA on the other end, a power supply cord for the unit along with a hard cable wall wart style adapter. (The adapter says it's the standard 100 to 240-volt input, but the output is a switchable 12 volts with a maximum of two amps.) The power connector is a commonly used push-in banana plug style.Interestingly enough, the reader itself is shipped inside a static bag. I guess that makes sense, but I wouldn't think that static would interfere with a connected device like this. The actual connector device is quite compact, about half the size of a cell phone. It has a standard four-prong computer power supply connector on one side along with a USB c connector power in for the 12-volt power supply and a sliding on-off switch. The other three sides of the box are your hard drive connectors, one for SATA, 1 for IDE, and one for a laptop-sized IDE. According to the instructions, it is possible to cook up two drives at the same time, as long as they're two different types of drives. For example, an IDE and a SATA. The instructions for this seem fairly straightforward, and include step-by-step instructions, even to include changing jumper settings on hard drives if necessary. I like the way this is set up, it's simple and effective. The cardboard box that the unit comes in is of a design so that it's easily reusable to store the adapter in when you're not using it. I like that it comes with all of the cables. Also, you don't have to go hunting for a cable to connect to your PC or laptop when you have a drive to spin up.All in all, it's a fairly versatile adapter that is small enough to be easily portable. I think this will make a fine addition to my computer tool bag.

Did not like how it did not come with the remote or the power adapter. Had to return. Seems to be used

I use this with my Nikon d5500 and it fits well with a 35 to 70mm zoom attached. If you go with much bigger, the config will have to change to fit it. It will hold an additional zoom and some misc items. It's a bit much to carry if you are going to stick with a single lense all day.