Yes. I have the same lens and adaptor on my Sony a7ll and it works beautifully. The m42 is also known as the 'universal' mount as other 3rd party camera and lenses also used it. I own 6 other K&F e-mount adaptors to different lens makers (ltm, MD, CF/CD, Nikon) and they all are well built with a nice snug fit. Highly recommended. 

Yes, it will fit any Sony e mount body, either full frame (a7..., a9...), or aps-c (like a6500, etc) 

Please note: our M42 adapter ring could not be suitable for Pentax Takumar Super Takumar Carl Zeiss M42 series（aperture pin does not fully depress, small tabs sticking out), as ours depresses the aperture pin all the way down

 

I actually have not received this adapter yet. It's shipping from China. Don't think that was disclosed in the ad. However, I do not believe this is for the Pentax Q body rather for digital and film cameras that take the Pentax K mount in its many variations. So I'm expecting to be able to mount my Leica M mount lenses on my digital and film Pentax K mount cameras, no autofocus or relay of exposure information, only to be used with manual focus and exposure. 

1. If there is ever any more than a slight amount of rotational play, you may want to try tightening the lens mount adapter so it will hold the lens tighter to the mount. There are 3 flanges in the middle of the adapter (what the lens locks onto) that are split open slightly, this gap is what gives the tension that holds the lens tight to the body. Over time and with use these gaps decrease in size, no longer pulling the lens tight to the adapter, which allows the lens to move inside the mount more than it should.
2. To tighten the fit, get a slim metal object (a #1.5 or #2.0 small flat eyeglass screwdriver is ideal) and insert it into the slit to open it up just a little bit (see images below, make sure to do it to all 3 evenly). The more you open the gap, the tighter the lens will be to the adapter; too much and the lens will have a hard time mounting so make sure to do it just a little bit at a time to all 3 flanges evenly, it doesn’t take much at all to get a tight fit.Note: please do not use too much strength, or the shrapnel will be damaged.