Rf Mount Macro Lens
Related Product
Beschoi Leica 28 mm/90 mm M39 Lens to Leica M Camera Body K&F Concept Lens Mount Adapter
Prime Day
Prime Day
Beschoi Leica 28 mm/90 mm M39 Lens to Leica M Camera Body K&F Concept Lens Mount Adapter
$21.40
K&F Concept MCN1 55mm Lens Filter Kit ND1000 CPL with Multiple Layer Nano Coated
Prime Day
Prime Day
K&F Concept MCN1 55mm Lens Filter Kit ND1000 CPL with Multiple Layer Nano Coated
$30.99
K&F Concept MCN1 43mm Lens Filter Kit ND1000 CPL with Multiple Layer Nano Coated
Prime Day
Prime Day
K&F Concept MCN1 43mm Lens Filter Kit ND1000 CPL with Multiple Layer Nano Coated
$29.99
72mm ND2-ND32 (1-5 Stop) Variable ND Filter and CPL Circular Polarizing Filter 2 in 1 for Camera Lens No X Spot Weather Sealed
Prime Day
Prime Day
72mm ND2-ND32 (1-5 Stop) Variable ND Filter and CPL Circular Polarizing Filter 2 in 1 for Camera Lens No X Spot Weather Sealed
127
$78.99
Related Faq
Q
Can I still use my stock lens hood?
A
We installed it on our Canon RF 24-105 lens and it was possible to use the lens hood on this lens because the lens hood attaches to the lens via the bayonette mount which is on the outside of the lens diameter and the magnetic filter adapter screws into the thread on the inside of the lens. 
Q
Can i use this on a canon d80 100 mm macro ef lens ? it says 67 mm on the lens cap but i don't see the exact answer. thank you
A
67mm should also be stenciled on the front edge of the lens somewhere. If so, then you should be good to go. It should be on the lens because a lens cap can be lost or broken. 
Q
Will this work on my sony a6000 and tokina minolta 100-300mm macro zoom?
A
Yes 
Q
Too loose/there is gap between lens and adapter ring
A
  1. If there is ever any more than a slight amount of rotational play, you may want to try tightening the lens mount adapter so it will hold the lens tighter to the mount. There are 3 flanges in the middle of the adapter (what the lens locks onto) that are split open slightly, this gap is what gives the tension that holds the lens tight to the body. Over time and with use these gaps decrease in size, no longer pulling the lens tight to the adapter, which allows the lens to move inside the mount more than it should.
  2. To tighten the fit, get a slim metal object (a #1.5 or #2.0 small flat eyeglass screwdriver is ideal) and insert it into the slit to open it up just a little bit (see images below, make sure to do it to all 3 evenly). The more you open the gap, the tighter the lens will be to the adapter; too much and the lens will have a hard time mounting so make sure to do it just a little bit at a time to all 3 flanges evenly, it doesn’t take much at all to get a tight fit.Note: please do not use too much strength, or the shrapnel will be damaged.
 
Q
What kind of rear and front caps would I buy to go on this since it doesn't come with any?
A
I don't think you need any. There is no glass. 
Related Video
K&F Concept® Lens Mount Adapter for Canon EOS EF mount Lens to GH4
K&F Concept 52mm Macro Close up +1 +2 +4 +10 Lens Accessory Filter Kit Review
K&F Concept EOS 58mm Macro Reverse Adapter Ring Camera Mount Adapter Review
Related Blog

Ef Lens On Rf Mount Canon Rf Lens Mount Anamorphic Lens Rf Mount Ef-s Lens On Rf Mount Efs Lens On Rf Mount C-mount Lens With Visual Field 1-5 Inches E Mount Lens To Rf Mount Ef Lens Rf Mount Lens For Rf Mount Nikon Rf Lens Mount

Fujifilm X30 Lens Hood And Filter Kit Zeiss Batis 85mm F1 8 Sony E-mount Canon 50mm 95 Mount Canon Ef-m Mount Competble Canon Rf Lense On E Mount Samsung Gx20 Lens Mount Nikon 3 Pin Adapter Sony A6000 Nex Mount Sony E Mount 15 108 Sony E Mount Camera Price