Very Heavy, Stout Body but large super durable Mesh.Needs power, I was clipping my Steinberg to run it without a Fethead, but with it my preamps are dialed in at about 1 o’clock and clean.It is not a doorbuster for an SM7B by Shure but is an upgrade over similar priced mics like The Audio Technica AT2020The mount it comes with is permanent the threads are fixed to the mic body itself, seems to hold up well as a shock mount but I would prefer if I could use one of my nicer third party shockmounts.I would suggest a foam windscreen for it. The mesh is course and may snag a beard the plosives without a pop filter are ok, but not fantastic. I am using one from an Apex 540 which works great but am unable to find spare replacements of it unfortunately.

What can I say! It's a Canon body cap that will fit any canon camera with EF anf EF-S mount, doesn't matter if it's a full frame, APS-C, or film. In other words, if your camera was made in the last 30 years, this cap will fit!

I was looking at the nikon d3100 and this camera for awhile. I just liked the canon body better. Very easy to use and I am slowing learning to use some of the advance features. I got it on an early Black Friday sale for $340 so it was a no brainer. Really like using the portrait feature.

I love macro photography and recently brought a regular speedlight (albeit a compact one) so that I could take it around with me; a bit of a pain, if I'm honest, with having the diffuser on it and trying to get the best light. Then I noticed this one a month after, and it was even cheaper, so I thought I would try it.I actually have 2 macro lenses over the years, a Nikon F mount and a Nikon Z mount, and there is an important thing you need to do with the Z mount lens; do not mount the flash to the lens part, which moves in and out, attach it with a larger adapter to the outer case. This is because it will put undue pressure on the lens and can result in lens motor failure. I did a lot of research on that, so I thought you should know.Loved the fact that it came with so many adapters, as I was a bit worried I was going to have to find some to fit my lenses.The light is beautifully even that comes out of it and really makes your picture pop, and the cable to the main unit is soft and flexible and doesn't pull against front. Very simple controls on the back to adjust the power, and so far, I've only needed the lowest setting for macro work, although I'm sure the higher setting will come in useful for portraits (not tried that yet).

I love this mount. It is not compatible with the Nikon FTZ adapter unless you move it from the body to the adapter or buy another mount just for the adapter. I’ve hike a couple mountains and bustled through crowds without fail using this mount.

Lightweight and fully adjustable. Easily attaches to my backpack when hiking and light enough that it hardly seems like it is there. Comes with a quick release plate that attaches to the camera body (or lens mount) and makes it quicker to set-up on the tri-pod. The down side to this set-up is if you change between the camera body and a lens mount, you will need to remove the plate from the camera body and install it on the lens. If you use you camera with multiple lenses (that use a mount), go ahead save yourself the headache and order extra quick release plates to use on each of these items.

For strenuous travel conditions, we bought separate lens and body bags for our Nikon D3300. Didn't use it very much (as expected) because most of the time we could use the body/lens bag. However, it worked great when we did need it to allow the lens and body to be separated for transit. Fits the Nikon D3300 perfectly.

Plenty of useful bits, all seem to bit together well. The body mount and head mount work great!