I bought this strap to use with my Sony a6400 camera to replace the Op-Tech strap I had been using. While I like the Op-Tech for my larger camera, I thought it was simply to big for the a6400. This one seems more appropriate. I did remove the triangular "rings" that came with the camera before I installed the new strap. A very small screwdriver to open the rings and a tiny pair of needle-nose pliers to turn them helped a lot with the reloan and installation.

I absolutely LOVE this bag. It's much larger on the inside than it looks on the outside. I use it for my Sony A6000 mirrorless camera and all of it's accessories. Recently wore this bag all day on a family trip to Disneyland and it was fantastic. So easy to keep on my back when not in use, but easily slide it under my arm and around front to pull out the camera quickly when a photo opportunity presented itself. The bag has a side pocket that unzips from the bottom of the bag and a strap to hold a tripod on the side. You strap the tripod on and slide one of the legs of the tripod into the pocket at the bottom to keep it from sliding out. There is also a waist strap to secure the sling bag and prevent it from sliding around if preferred.This is what I currently have in this bag:- Sony A6000 with a Zeiss 24/1.8 attached- Sony 16-50 kit lens in an Altura soft lens case- Sony 55-210 kit lens- Fotasy 35/1.7 with attached adapter- Sony ECM-XYST1M external stereo microphone- Marumi 49mm filter & step-down adapter- Altura complete camera cleaning kit- Two flash bounce cards- Two extra batteries- Charging cordOne last thing, they were out of stock when I needed one, so I ended up ordering a used one from Amazon's Warehouse Deals. As far as I can tell, the bag was never used and was in immaculate condition. Wouldn't hesitate to recommend, new or used.

Just perfect.I bought one of these for my Sony RX-10 for use during a long vacation that involved a lot of walking and hiking. I wish I had discovered this sort of strap a few years earlier. I didn't care much for the screw-on piece that came with the strap so I also bought an Arca-Swiss fusion plate.The strap itself is excellent. High quality, comfortable and looks good. It's relatively easy to slip on and off - I'm able to put it on in under 30 seconds. Adjusted correctly, the camera doesn't swing around much at all. I was able to do a couple of fairly strenuous hikes without any camera-related discomfort.Lifting up the camera to shoot is a smooth natural motion. I'm very pleased with the strap, now I'm wondering if I should buy a second strap for my SLR or share this one between both cameras.

It's a good strap better then what came In my sony package

Part 1 - Minolta MD to Sony NEX adapterTechnically, it slightly overshoots infinity but the issue is easily corrected by dialing back the focus ring just a tad --- Not exact but clearly better than not-at-all.Although very light due to extensive aluminum usage, the build quality and fit-and-finish of the adapter is superb. Connections on the lens and camera mount sides are tight and precise --- absolutely, zero slop. The top of the lens release button is flattened making the lens removal process very easy and comfortable.Other notes:- There are no electrical connections so focus and zoom must be done manually on the lens itself- When mounting the lens, turn the adapter clockwise till you hear a "click"- Tested with a Minolta 85mm f/1.7 Rokkor-X MD lens mounted to a Sony a6000 camera-----------------------Part 2 - Nikon Ai to Sony NEX adapterEdit: Based on my positive experience with the Minolta MD adapter, I also purchased the Nikon Ai adapter later.As with the Minolta MD adapter, the Nikon Ai version focuses beyond infinity a tiny bit. Fortunately, the same solution applies - dial back the focus ring and the horizon will become crystal clear. The build quality is impeccable and the finish is smooth and clean of burrs or machine marks. Connections on both sides are taut and precise with zero play.Additional notes for Nikon Ai adapter:- No electrical connections present so focus and zoom must be done manually on the lens.- Unlike the Minolta MD adapter, mounting the lens for Nikon adapter requires a counter-clockwise turn until you hear the "click" of the locking mechanism- Tested with a Nikon Micro Nikkor 55m f/2.8 Ai-S MF lens mounted to a Sony a6000 camera

If you have a SONY camera, you need an adapter shoe like this one: http://www.amazon.ca/gp/product/B004DE1BJS?redirect=true&ref_=cm_cr_ryp_prd_ttl_sol_5Works for my SONY Alpha A3

Works great with old manual focus Minolta lenses on a Sony A3000 camera. Fit of adapter to camera and fit of lens to adapter are both precise.

I’m currently using my Sony a 5000 with this clip on my backpack strap it’s really easy to use about no problem once the cameras on the clip it’s not going nowhere