Tamron Adaptall Lens Mount Adapter Fuji X
Related Product
Tamron Adaptall ii Lenses to Micro Four Thirds (M4/3) Camera Mount Adapter
Prime Day
Prime Day
Tamron Adaptall ii Lenses to Micro Four Thirds (M4/3) Camera Mount Adapter
2
$24.99
Related Faq
Q
I have a 1st gen tamron 70-200 f/2.8 lens for my nikon d80... will this work on fuji xt3? tamron lens does not have an aperture ring.
A
The adapter is designed for Nikon lenses, including D mount. If the Tamron fits the Nikon D80 it should work. As for the lack of aperture ring on the Tamron ... not sure about that. Perhaps the Nikon D80 has an in camera aperture selection. 
Q
Can this work for kodak pixpro az421 camera
A
The adapter is made for the Fuji X Mount. I don't know what is the Kodak spec. Why not call K&F and have them answer. 
Q
can you use a pinch lens cap over this filter?
A
The Answer is Yes. You can use a pinch cap over most filters. ALL my lenses have a filter of some sort on them. I use to use a lot of "traditional" lens caps on all my old Nikkor lenses but putting them on and taking them off became a giant PITA, so I got a Pinch Cap as a test. I then converted ALL the lenses to Pinch Caps. Hope this helps. 
Q
Too loose/there is gap between lens and adapter ring
A
  1. If there is ever any more than a slight amount of rotational play, you may want to try tightening the lens mount adapter so it will hold the lens tighter to the mount. There are 3 flanges in the middle of the adapter (what the lens locks onto) that are split open slightly, this gap is what gives the tension that holds the lens tight to the body. Over time and with use these gaps decrease in size, no longer pulling the lens tight to the adapter, which allows the lens to move inside the mount more than it should.
  2. To tighten the fit, get a slim metal object (a #1.5 or #2.0 small flat eyeglass screwdriver is ideal) and insert it into the slit to open it up just a little bit (see images below, make sure to do it to all 3 evenly). The more you open the gap, the tighter the lens will be to the adapter; too much and the lens will have a hard time mounting so make sure to do it just a little bit at a time to all 3 flanges evenly, it doesn’t take much at all to get a tight fit.Note: please do not use too much strength, or the shrapnel will be damaged.
 
Q
Are these compatible with any 58mm thread lense?
A
They are universal....they fit on my Canon and my Fuji 58mm lens. 
Related Video
K&F M10111 M42 Lenses to Fuji X Lens Mount Adapter
K&F M18111 Nikon G/F/AI/AIS/D Lenses to Fuji X Lens Mount Adapter
K&F M13111 Canon FD Lenses to Fuji X Lens Mount Adapter
Related Blog

Tamron Adaptall 2 Nikon F Mount Tamron Adaptall Mount For Nikon Tamron Adaptall 2 To Canon Eos Adapter Tamron Adaptall Lens Mount Adapter Tamron Adaptall 2 Lens Mount Tamron Adaptall 2 To Nikon F Adapter Tamron Adaptall Nikon Mount Tamron Adaptall-2 To Nikon Z Mount Tamron Adaptall Mount Pentax Rokinon 8mm F3.5 Sony E-mount

Go Light Radioray Lens Filter Leica Tl M Adapter Canon Rebel T5 Audio Adapter Adapter Vs Direct Ef S Lens Minolta Af Sony Nex Adapter Aa Battery Adapter For Nikon D3200 Nikon D850 Slide Adapter Optitek Prolock Nikon Mount Sony Z3 Ps4 Controller Adapter Sony E-mount 16-70mm F 4