It's a UV filter. Screws on. Stays on. Protects the lens from smashes and such.

Faultless!The Neutral Density (ND) filters are wonderful and they do stop the light hitting the sensors no problem.The other filters are perfect too but normally you don't need a UV filter on a digital camera but I use it just to protect the lens.The other filters will them screw onto the UV filter but don't screw too tight.The polarised filter does have a revolving rim "GASP" and is ideal. I didn't realise it had a revolving rim until I actually used it and screwed it on.I can tell you now that anyone giving these filters and less than 5 stars are bonkers because these are superb.The wallets they came in are and look really well made as does the filters. The rubber lens shade is really good too and will push flat to allow it to fit in your case. I have no use for the plastic screw on shade so that will be used for something when I have my thinking head on.The lens cap is a good one and comes with a lanyard but I will not use the lanyard as I do not want it dangling from the camera.I would recommend these to anyone who want cheap but quality lenses.

Have been searching for a dedicated 112mm filter case ever since the release of the Nikon Z 14-24mm Lens. The case is well made, compact and lightweight, I use Nisi filters, but so far Nisi have not released a dedicated case for 112mm so this will be fine.

This filter is to use on my new Nikon 16-80mm DX Zoom. There are less expensive as well as much more expensive filter available but I went with the Ritz Gear 72mm UV filter because it was described as "super slim" and I wanted the thinnest one I could find. The Ritz Gear UV filter is indeed VERY THIN and once threaded into the lens it barely sticks out yet still has the outside threads to accept a lens cap or even another filter. The glass is SCHOTT Glass and is crystal clear and the front element of the Nikon lens still looks like it isn't even covered by a filter. Great filter at a Great price!

I do not use these for the UV filter but as a good quality, low cost lens protector. That said:My 1st Tiffen was a 55mm UV Protector I got for the kit lens that came with a Sony a7ii; an FE 28-70. I was so happy with the purchase that I have since purchased three additional Tiffen UV Protection Filters. One is on a Sony E 55-210 I bought used and one is on a Samyang 35mm I bought new. The one I am writing this review for I assume is still on the Sony FE 50mm I bought new but returned and forgot to remove the filter.The point? I treat my lenses, new or used, like I treat a cell phone. That being the phone stays in the box until I have a protective case for them and lenses stay in the box until I have a protective filter to pair them with. And the one I forgot to remove from the returned lens? That is how confident in the Tiffen filters I am. Once I put one on a lens, I never need to think about it again.I have used several brands in several sizes ranging from the cheaper Altura and Polaroid to the mid range Hoya and B & W.Where does Tiffen fit? Well they are no Hoya or B & W but I am no professional photographer. I am an amateur who mostly enjoys street photography when I travel and for my money Tiffen is the best. Yes, you can spend more and get better glass and if you really have reason to worry about ghosting you should look for a higher end lens. That isn't me saying ghosting has been a problem for me. I normally use a lens hood and I think that helps cut down on light reflection. I have noticed some minor issues with it on some shots I have taken in direct bright light conditions but not enough to justify the higher price.I do not stack filters as I haven't had a need to so I can not give an opinion on that topic. I would assume that the risk of ghosting would increase.The short version is this. The Tiffen UV Protection Filter is well made with good quality glass and a metal ring with threading I do not worry will cross thread or strip. They do what I need by protecting my lens. If I was buying a ND or polarizers I might buy a more costly brand but for everyday protection, Tiffen is all I need and the best for my money.Tiffen say it best in their own product description; A small price to pay to protect your investment.

This is a great filter, I use it on a Nikon D5600 w/Tamron 10-24mm lens. The only downside is I have to remove the lens hood to use the filter. Typically if you are using a filter it is because you are working outdoors and a good is necessary. I use it strictly for video to maintain a 1/100 shutter speed while shooting exteriors for motion blur accuracy’s. The filter does a great job! Being adjustable has its good side and it’s bad. The bad is sometimes you will adjust for other areas of an outdoor event and the color changes when it should remain fluent. I’m thinking that maybe I should get a fix filter instead of an adjustable. The positive side is, I don’t have to take it off to shoot interiors. I just adjust it down to 0 again. I’d buy this product again, but I’d also like to try a fixed ND filter.D5600Tamron 10-24mm 77mm thread size

Good to have this as it doubles up as dust protection for lens apart from being a UV filter

I first purchased the K&F Nano Series filter for one of my lenses. I believe it was for my Nikon 80-200mm F2.8 D ED lens. That lens produces really sharp images at distance and is not a close focus lens, even noted by Nikon. I bought the lens used and it came with a beat up UV filter. I was getting ghosting and when I removed the filter the ghosting was significantly reduced. I ended up buying several more for my other lenses. I also use B+W filters too. Well made filters as well, but a little more costly. The K&F is by no means a $100 filter, but for the price it does what I need. I especially like the nano-coating that resists grease and water. Worked well when I was photographing at the beach. Easy to clean the sea mist off without smearing. We really do not need UV filters anymore with digital since UV does not interfere with the sensor like it did with film. I simply use them to keep from having to clean the front elements of my lenses all the time. I feel reducing that to a minimum will prevent potentially scratching the element. I know there are a few schools of thought on this topic, but I just do what I am comfortable with. From what I read and can tell the filter is glass and not plastic, which is nice these days. I have them on all my lenses now and happy with them.