Yashica Fx-d Lens Mount
Related Reviews
Jessica
5
brilliant writing, incredible cast
The south, a show from FX, brilliant writing, incredible cast, never boring. One of the best shows I have ever seen! Timothy Olyphant!! Enough said!
12/11/2022
Kiyo M. Kiyo M.
4
Pretty bright and has a magnet
Pros:- It actually gets pretty bright (there's many pocket video lights and some of their max is so dim compared to this)- Magnet (so useful!)- Comes with diffuser- Can switch to CCT, RGB (HSI), FX (MLM)- Bluetooth/App support (a lot easier to quickly change things and from a distance; must have)- charges via USB-CCons:- Can't customize/adjust FX (for example the rate of the police lights)- Can't quickly jump increments (I've seen others where you can just press the middle scroll so you don't have to keep holding it)It's not perfect, but I like this one for its brightness power, magnet, and app support.
30/08/2022
gwadaman
5
tres bonne qualite comme d'habitude avec case logi
Parfaitement adapté a mon panasonic lumix dmc fx 37 de dimensions 9.4cm sur 5.3 cm sur 2.3cmUne dragonne, interieur bien rembourré et une pochette extérieure pour un prix mini avec la qualite case logic
20/07/2022
Paladin
5
Excellent sound quality.
I listen to music and stream videos mostly. I like this sound card better than the Audigy FX I had before. Since I have these cards in 3 computers and I tell you that the Audigy FX did not last more than a year or two before failing in two of my computers. I hope this one works longer.
30/04/2022
tp1138
5
Excellent music quality
I tries the asus Xonar DGX (CMI chip) but the sound is really bad. I tries the Sound Blaster Audigy Fx (Realtek chip as with most motherboard) and the sound is a bit better but it's still bad.The Audigy Rx has the E-MU chip and the sound quality is excellent, Xonar DGX and Audigy Fx simply don't worth it. If you are to buy a Audigy card make sure it's a Rx!
23/12/2021
RoY
5
Great sound, easy to use.
Really a step up from my supreme fx onboard soundcard. Great with hyperx cloud alpha and sennheiser 6xx.
16/12/2021
Bill
5
Excellent Camera
This is an excellent camera for all users such as me. I had a Yashica camera with film. For years I was resisting to get into the digital world. Now, with this camera, I am totally sure I was too late to change. It's an excellent image with those 12mp.
04/11/2021
Vince Coghlan
5
works well with pci passthrough on arch linux
this card has preformed great so far. it is plugged in to one of the x1 slots on my AORUS gaming 7 mobo. my computer is running linux, and passing the audio card through to a windows 10 VM through OVMF. if you are looking to solve the stuttering sound issue that people have with this setup, without enabling MSI interrupts (the correct solution), this should work for you too. it sounds great, and i think some of the FX are actual hardware FX, which is really cool. the program that controls it all, however, is archaic and arcane. the few features it presents are obfuscated by an interface that makes you think the card doesn't have all that much to do. it also installs like, 7 different things, which is super lame of the manufacturer. i still cant complain, for me its the sound that counts, and it sounds great, especially the 600 ohm headphone jack. one feature i liked is the ability to mirror the front channels with the rear channels in a 4.1 setup, allowing me to put audio out through my speakers, and headphones at the same time, and control the volume ratio between both. the mic input sounds great too...
07/10/2021
Related Faq
Q
Will this work on my sony a6000 and tokina minolta 100-300mm macro zoom?
A
Yes 
Q
Too loose/there is gap between lens and adapter ring
A
  1. If there is ever any more than a slight amount of rotational play, you may want to try tightening the lens mount adapter so it will hold the lens tighter to the mount. There are 3 flanges in the middle of the adapter (what the lens locks onto) that are split open slightly, this gap is what gives the tension that holds the lens tight to the body. Over time and with use these gaps decrease in size, no longer pulling the lens tight to the adapter, which allows the lens to move inside the mount more than it should.
  2. To tighten the fit, get a slim metal object (a #1.5 or #2.0 small flat eyeglass screwdriver is ideal) and insert it into the slit to open it up just a little bit (see images below, make sure to do it to all 3 evenly). The more you open the gap, the tighter the lens will be to the adapter; too much and the lens will have a hard time mounting so make sure to do it just a little bit at a time to all 3 flanges evenly, it doesn’t take much at all to get a tight fit.Note: please do not use too much strength, or the shrapnel will be damaged.
 
Q
What kind of rear and front caps would I buy to go on this since it doesn't come with any?
A
I don't think you need any. There is no glass. 
Q
Does this adapter allow for canon fd lenses to focus to infinity on sony e-mount mirrorless cameras?
A
yes, i had no problems with infinity focus with this adapter. the only FD mount lens i use anymore with my sony is a vivitar 20mm, and i pretty much only shoot infinity focus with it. 
Q
is this mount adapter work with panasonic GX-7 body & nikkor dx 18-200 lens.
A
The adapter will mount the lens and you will be able to use it manually. However, my copy of the adapter does not allow the lens to be fully mounted all the way until it clicks into place. It doesn't quite make it, but it's still very solidly mounted. Also, the manual aperture linkage doesn't work properly (on my copy, at least) so exposure is controlled only by shutter speed and/or ISO. You will be able to manually focus and zoom the lens but no VR, of course. It will be a frustrating experience. Instead, get a 14-140 Panasonic zoom if you can afford it! 
Related Video
K&F Concept® Lens Mount Adapter for Canon EOS EF mount Lens to GH4
K&F M10101 M42 Lenses to Sony E Lens Mount Adapter
K&F M10111 M42 Lenses to Fuji X Lens Mount Adapter
Related Blog