Yashica Fx-d Quartz Lens Mount
Related Reviews
Douglas A McCarty
5
Bright lights!
3d order of these lights. They have replaced 9 500w quartz lights (that's 4.5KW!) and all total use less than 1 of the quartz bulbs! Attractive, easy to install, and (lhopefully) a lot longer lasting than the quartz bulbs.
30/01/2023
Paul Baldwin
5
Love it
I had a 300 watt Quartz light up and put this 32 watt LED light up in its place. The brightness of the led is amazing
22/11/2022
Rich in ILM
5
Great
It is like turning on daylight. Also much greater illumination, and much less current draw than the 2x500 watt quartz lights I replaced.
17/11/2022
Kiyo M. Kiyo M.
4
Pretty bright and has a magnet
Pros:- It actually gets pretty bright (there's many pocket video lights and some of their max is so dim compared to this)- Magnet (so useful!)- Comes with diffuser- Can switch to CCT, RGB (HSI), FX (MLM)- Bluetooth/App support (a lot easier to quickly change things and from a distance; must have)- charges via USB-CCons:- Can't customize/adjust FX (for example the rate of the police lights)- Can't quickly jump increments (I've seen others where you can just press the middle scroll so you don't have to keep holding it)It's not perfect, but I like this one for its brightness power, magnet, and app support.
30/08/2022
RAC
5
Works on stainless steel sinks too
9 ft ceilings, hardwood floors, quartz countertops, and drywall in an open floor plan make for an acoustical nightmare in the kitchen. The stainless steel sink, despite having a factory applied sound absorbing coating, adds to the din when doing dishes or running the garbage disposal. This acoustic mat dramatically cut the noise level.
20/08/2022
Paladin
5
Excellent sound quality.
I listen to music and stream videos mostly. I like this sound card better than the Audigy FX I had before. Since I have these cards in 3 computers and I tell you that the Audigy FX did not last more than a year or two before failing in two of my computers. I hope this one works longer.
30/04/2022
Harte
5
New favorite headphones and they’re SO cute
I got the quartz Razer kitty kraken ears to put on and they match perfectly.I bought these ago replace my Steelseries headphones because they have the same kind of shape, and I think the sound quality is about the same, but the noise cancelling is MUCH better. I’m not used to being unable to hear when people are at the door. The setup was really simple, and the connectivity is immediate and strong even if I walk across the house. I really love these!
29/12/2021
Bill
5
Excellent Camera
This is an excellent camera for all users such as me. I had a Yashica camera with film. For years I was resisting to get into the digital world. Now, with this camera, I am totally sure I was too late to change. It's an excellent image with those 12mp.
04/11/2021
Related Faq
Q
Will this work on my sony a6000 and tokina minolta 100-300mm macro zoom?
A
Yes 
Q
Too loose/there is gap between lens and adapter ring
A
  1. If there is ever any more than a slight amount of rotational play, you may want to try tightening the lens mount adapter so it will hold the lens tighter to the mount. There are 3 flanges in the middle of the adapter (what the lens locks onto) that are split open slightly, this gap is what gives the tension that holds the lens tight to the body. Over time and with use these gaps decrease in size, no longer pulling the lens tight to the adapter, which allows the lens to move inside the mount more than it should.
  2. To tighten the fit, get a slim metal object (a #1.5 or #2.0 small flat eyeglass screwdriver is ideal) and insert it into the slit to open it up just a little bit (see images below, make sure to do it to all 3 evenly). The more you open the gap, the tighter the lens will be to the adapter; too much and the lens will have a hard time mounting so make sure to do it just a little bit at a time to all 3 flanges evenly, it doesn’t take much at all to get a tight fit.Note: please do not use too much strength, or the shrapnel will be damaged.
 
Q
What kind of rear and front caps would I buy to go on this since it doesn't come with any?
A
I don't think you need any. There is no glass. 
Q
Does this adapter allow for canon fd lenses to focus to infinity on sony e-mount mirrorless cameras?
A
yes, i had no problems with infinity focus with this adapter. the only FD mount lens i use anymore with my sony is a vivitar 20mm, and i pretty much only shoot infinity focus with it. 
Q
is this mount adapter work with panasonic GX-7 body & nikkor dx 18-200 lens.
A
The adapter will mount the lens and you will be able to use it manually. However, my copy of the adapter does not allow the lens to be fully mounted all the way until it clicks into place. It doesn't quite make it, but it's still very solidly mounted. Also, the manual aperture linkage doesn't work properly (on my copy, at least) so exposure is controlled only by shutter speed and/or ISO. You will be able to manually focus and zoom the lens but no VR, of course. It will be a frustrating experience. Instead, get a 14-140 Panasonic zoom if you can afford it! 
Related Video
K&F Concept® Lens Mount Adapter for Canon EOS EF mount Lens to GH4
K&F M10101 M42 Lenses to Sony E Lens Mount Adapter
K&F M10111 M42 Lenses to Fuji X Lens Mount Adapter
Related Blog