Yashica Tl Electro Lens Mount
Related Product
Related Reviews
Jess C
4
Legit strap, but don't use for Mamiya 645 Pro TL,
So, this doesn't work on Mamiya 645 Pro TL cameras with motor drives. That might have been my bad. But, I made that shit work by prying off the clip on one side, and sandwiching it between the motor drive and the camera, on the motordrive pin. The strap, itself, despite it's trouble with my specific camera, is REALLY high quality. I give it four stars.
03/01/2023
David Wiley
4
Actually good running earbuds!
tl;dr: Battery life seems really good (though, I haven't used it for multiple hours as of writing this). Sound is always good, and they're actually comfortable to wear! Can't really say one way or the other on noise cancelling for sure, but it does seem good. Lastly, the connection is always stable with my phone (Pixel 6) when I use it. Which was the most important thing for me. So I can safely recommend this product.
09/08/2022
Sean Williams
5
It's pretty solid and does a good job
It's pretty solid and does a good job. I did try the Electro-Voice ND767A, but it's almost 4x the price and maybe 1.5x as good, so I think this is a great value.
28/01/2022
JP
5
Yes!!
Installed these in my 2004 Acura TL. Fit perfectly and sound amazing
28/01/2022
mark rivet
5
Great mic.
What can I say. It’s the SM-58. Vast improvement over my Electro-voice. Almost impossible to get feedback which was always a problem with my old mic.
25/11/2021
K. Yee
4
Great lock but check compatibility!
TL:Dr - Check compatibility before orderingVery well engineered and designed device. Installation was a breeze. App setup and pairing was quick. The lock worked as anticipated. However, I am returning it.We have a Baldwin entry door handle and deadbolt that’s a few years old. The lock front cylinder is too deep to properly sit within the front plate. (Or the Level Bolt gear housing is too thick depending how you look at it.) Unfortunately the key cylinder extends about 0.5cm / 3/8” from the front trim plate.I considered replacing the cylinder to keep the Level Bolt. I looked to see if Baldwin has a shallower key cylinder but couldn’t confirm if indeed one exists.Anyway, I will reorder the Level Bolt if or when I can source a different cylinder.
07/11/2021
Bill
5
Excellent Camera
This is an excellent camera for all users such as me. I had a Yashica camera with film. For years I was resisting to get into the digital world. Now, with this camera, I am totally sure I was too late to change. It's an excellent image with those 12mp.
04/11/2021
CD Carter
5
... to mount on the lens but it works just fine.
I'm another Nikon owner who had concerns about being able to get this to mount on the lens but it works just fine.
22/01/2021
Related Faq
Q
Will this work on my sony a6000 and tokina minolta 100-300mm macro zoom?
A
Yes 
Q
Too loose/there is gap between lens and adapter ring
A
  1. If there is ever any more than a slight amount of rotational play, you may want to try tightening the lens mount adapter so it will hold the lens tighter to the mount. There are 3 flanges in the middle of the adapter (what the lens locks onto) that are split open slightly, this gap is what gives the tension that holds the lens tight to the body. Over time and with use these gaps decrease in size, no longer pulling the lens tight to the adapter, which allows the lens to move inside the mount more than it should.
  2. To tighten the fit, get a slim metal object (a #1.5 or #2.0 small flat eyeglass screwdriver is ideal) and insert it into the slit to open it up just a little bit (see images below, make sure to do it to all 3 evenly). The more you open the gap, the tighter the lens will be to the adapter; too much and the lens will have a hard time mounting so make sure to do it just a little bit at a time to all 3 flanges evenly, it doesn’t take much at all to get a tight fit.Note: please do not use too much strength, or the shrapnel will be damaged.
 
Q
What kind of rear and front caps would I buy to go on this since it doesn't come with any?
A
I don't think you need any. There is no glass. 
Q
Does this adapter allow for canon fd lenses to focus to infinity on sony e-mount mirrorless cameras?
A
yes, i had no problems with infinity focus with this adapter. the only FD mount lens i use anymore with my sony is a vivitar 20mm, and i pretty much only shoot infinity focus with it. 
Q
is this mount adapter work with panasonic GX-7 body & nikkor dx 18-200 lens.
A
The adapter will mount the lens and you will be able to use it manually. However, my copy of the adapter does not allow the lens to be fully mounted all the way until it clicks into place. It doesn't quite make it, but it's still very solidly mounted. Also, the manual aperture linkage doesn't work properly (on my copy, at least) so exposure is controlled only by shutter speed and/or ISO. You will be able to manually focus and zoom the lens but no VR, of course. It will be a frustrating experience. Instead, get a 14-140 Panasonic zoom if you can afford it! 
Related Video
K&F Concept® Lens Mount Adapter for Canon EOS EF mount Lens to GH4
K&F M10101 M42 Lenses to Sony E Lens Mount Adapter
K&F M10111 M42 Lenses to Fuji X Lens Mount Adapter
Related Blog