I like how easy it was to install (less than 5 minutes) and it’s built like a tank, I’ve struggled to find any reason why I wouldn’t recommend this holder.

Buy this Samsung drive ---- GREAT ---- definitely don't this ---- Lexar JumpDrive S80 256GB USB 3.1 Flash Drive, Up to 150MB/s Read (LJDS080256G-BNBNU), Black1 Slow2 bends and thus is suspect3 lasted only 4 months

Don’t pay attention to the wiring diagram in the box. I am not an electrician, and my only real experience with wiring comes from cars/engines, so when I looked at the diagram in the box, it correctly shows the original set up correctly with ground, white and black wires coming from the power source, the black and ground going to, and then from, your original switch, and then those three (green or copper ground, white and black) going to the bulb. BUT THEN the diagram shows that once you have installed the new switch, the wires going to the bulb in your wall have grown an extra ‘Line’ (a white, green or copper, a red and a black) wire, going to the bulb and only two (green or copper, and a white) coming from power. Don’t pay attention to that! No need to rewire you house! Here is how it should be: 1. Cut the power to the switch and test to be sure. 2. on the back of the switch take the green and twist it with the ground (copper) wires coming from power and the ground (copper) one going to the bulb. 3. On the back of the switch take the white wire and twist it together with the neutral (white) wire coming from the power AND the neutral (white) going to the bulb. 3. On the back of the switch take the red wire and twist it to the Load (black) wire going to the bulb only. 4. On the back of the switch take the black wire and twist it to the Line (black) wire coming from the power. 5. Make sure all of the exposed, twisted wires, other than the copper one that is always exposed, have their caps on and won’t touch metal to metal wires in the switch box. Then screw it into the wall put on the cover plate and turn on the power. Download the app and follow the instructions, the rest is easy. I hope that this was helpful and saves a bit of the headache I had to go through. Also, please note, I believe the graphic on the Amazon listing is correct, the booklet in the box had the diagram that threw me off. Once I understood the correct way to wire it, the instillation was a breeze.

Features seem pretty good but on the third time I closed the water proof case the plastic latch broke. Talked to customer service representative and they are sending parts to fix it out.

Great steering wheel controller! It doesn’t really sit in place, so it can be annoying to adjust the mounting system often, but regardless this is an awesome accessory and I’d absolutely recommend to anyone into racing games. Tested with Dirt Rally 2.0 and Project CARS.

ordered for black friday and thought i had a sweet deal, received the box on time today and set everything up. Packaging and everything was fine, just that when I plugged it in and got everything set it was dead on arrival. Turns out I can't return or ask for an exchangeupdate: got a replacement sent after talking to customer service, sound is great and setup was easy.Handle the speaker with the VGA looking port with extra care as that connects to the sub and powers everything.

The cover plates do not snap back onto the switches properly, You are then stuck using the old screw on coverplate. Otherwise the switches work well. Look professional, and the app integrates well with Google Home.

Worst quality for the price and doesn't work with morepro app