A really cool tripod to construction, strength, design and utility.During my test, it's result really suitable for every situation.Ben also made the packaging where there is a handy bag with carry handle, and just inside the tripod along with the instruction sheet for the different modes of use, a shoulder bag, an additional screw and a 10 cm extension to increase height.The tripod is very durable and is made of aluminum alloy that makes it nice as well as robust. Good also the weight that is about 2kg.At the base of the tripod they are placed rubber pads that prevent slipping and stabilize even on disconnected surfaces.The legs are extendable by rotating the screw so you can adjust and lock at any point.There are a total of 3 screws, then 3 pieces of extendable leg they do reach a maximum height of about 165cm.It's also possible to widen the legs of three different gradations.One of the 3 legs has a coating sponge because it can be unscrewed and used as a monopod when it's united with center post via the additional screw.The central rod that supports the head can be raised or lowered also by means of a rotatable screw.On the lower part of the rod is also present a hook to connect weights for stabilization.On the upper part instead, it's connected to the tripod a head, which can be rotated, tilted or moved vertically through the various regulators.There's also a spirit level to get the right angle.The central rod can be removed completely and be mounted upside down if you need to connect the camera to the bottom.To close the tripod is necessary to overturn the legs (bend them totally upward) so as to compact it to a minimum and reduce clutter.In the box there is also a bag to seal and protect the tripod head.I really recommend this product, for its technical features and for its build quality, certainly among the best in this price range.