67mm Fader ND2-ND32 (1-5 Stop) Variable ND Lens Filter Neutral Density Filter for Camera Lens NO X Spot Nanotec Ultra-Slim Weather-Sealed

SKU: KF01.1061

  • 49.99
Overall Rating 4.7   85
Reviews
3
Okay for the price
Threads seem uneven, squeaks and gets tight on lens threads, over all good image qualityDidn't break the bank so I would recommend for a beginner kit until you figure out if you actually need something better
29/05/2020
Related Reviews
H. F.
5
Works great and they DO accept standard rack screw
Worked great. Unlike what other reviewers say, these do accept standard rack screws. Yes, there is paint in the threads but this is standard with machined steel parts. It's no big deal. Simple install the screws with a drill and the threads will clean themselves out.
29/01/2023
Jim
5
Nice quality
Seems excellent quality. Doesn’t bind in threads like hoya
21/09/2022
Kindle Customer
4
1/4" Camera Tripod mount threads were bad.
This camera's base has a standard 1/4" threaded hole on the bottom so it can be mounted to a tripod. The threads on the camera I received were messed up and I my tripod would only screw in half a turn.Looking at the hole I could see no beveling on the edge at all. It looked like it had been just filed flat or possibly cut off. I don't know if it uses a pressed insert or if it drilled and tapped. I re-tapped it with a 1/4-20 and it is fine now.For most people who will hang these off their laptops or sit them on a desk this is not a huge issue. For those of you planning on using a tripod you might want to think twice.
13/05/2022
Mr. Big
5
For the money this is an awesome camera, I love th
For the money this is an awesome camera,I love the case with the metal threads to attach to a magnet, check out what I did with it on my youtube channel, If it can handle a D9 Caterpillar it can handle anything. [...]
18/03/2022
Customer
4
Good.
Works great but needs threads for the screws on the vga connector.
07/02/2022
Bruce Finnigan
4
assembly
have be very carefull with the staff threads, you are using pot metal
10/09/2021
Enoami
5
Great product for the money.
Just be careful when assembling, fine threads are easy to cross thread and strip.
02/09/2021
David S.
4
Well built stands except one key feature...
Very well built stands with the exception of the hard plastic twist locks. After a few adjustments the coarsely cut threads of the stand wore away the threads in the hard plastic thus making it useless. Otherwise a great product.
23/03/2021