This was a great buy and excellent popsocket. Very flexible adheres like glue but can be removed if you need to adjust it.

Here's some tips that might help you install this in a 2012, 2013 Ford Focus. You'll need a 7 mm socket and an extension for your ratchet. There's four 7 mm screws that hold down the top of the airbox cover, and you'll need the extension for two of them.Once you get the screws loose you might have to jiggle the airbox cover to get it off. With the stock air filter, try lifting it up from the back before you try and pull it out, because the back cover of the filter fits in a groove at the bottom half of the airbox.Before putting this new filter in, try slipping the top air box cover on it so you can see how the end cap of the filter slips into the groove. You've got to line it up perfectly and get it in the groove or you won't be able to line up your screws when you put it back together.When you put in this new filter stick the mouth part over the inlet pipe, reach down with your fingers and grab the bottom of the filter end cap, lift it slightly and push/slip it into the bottom groove of the airbox. Make sure the filter is properly inside that bottom groove. Then when you put the top half of the airbox cover on, slip the end cap of the filter into the groove first then set the cover down flat. All your screw holes should line up if you got that end cap properly in the grooves, top and bottom.I had trouble lining everything up at first till I figured out how to get it properly in the grooves. It fits perfectly and was easy to install. It just took me a while to figure out the groove thing. But now that you know and if you focus on getting it in the grooves it will line up perfectly for you.I haven't driven the car yet, but it starts up fine, and idling and revving the engine in my parking stall it sounds smoother. Idle is rock solid stable and it seems more responsive to throttle. I love K&N filters so I'm kinda biased, they go in all my cars. But I really can tell the difference. It's great. Take your time installing it and you'll love it.

Stuck on to the dashboard great suction highly recommend

I believe it was the case that the ring didn't stick to on 1 phone... It had texture. The other 1 stuck well to the other case that was smooth, that's y I bought it again.So don't buy this if u don't have a smooth phone case!!

2010 honda crv and this stuck immediately to the dash.

Amazing product! Suction is amazing! I had it stuck to my windshield and had an accident that cause a rollover and it was still stuck to the completely broken windshield.

it is what it is, I applied it to my truck, and it stuck

I like this JumpDrive. It works with my PC like it should. There's no extra software that tries to run when I immediately plug it in. I like the amount of storage, the price, how easy it is to use, and how fast items transfer or save to it. I also like the cap on the end of the JumpDrive. The drives with the retractable ends sometimes get stuck in or out. I'd rather just deal with the cap. This is a good JumpDrive at this price and size.